EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 15hrs 02min 57sec
Learn More →
ATWINC3400-XPRO

MCHPATWINC3400-XPRO

Microchip Technology
ATWINC3400 Xplained Pro 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board
Active45 in stock

Overview

The ATWINC3400-XPRO is an evaluation board for the ATWINC3400, a low-power system-on-chip (SoC) that combines 802.11 b/g/n Wi-Fi and Bluetooth Low Energy 4.0. This Xplained Pro kit provides a standardized header interface for Microchip's host microcontrollers, enabling rapid development of wireless IoT applications. The onboard ATWINC3400 module operates at 2.4GHz and features integrated power amplifiers and LNA for high performance.

Why Choose This Part

The board offers a dual-mode wireless solution in a single package, reducing bill-of-materials and PCB complexity. It supports SPI, UART, and I2C interfaces for flexible integration with various host MCUs. With power consumption as low as 232mA during high-speed 802.11n transmission, it provides a balance between wireless throughput and energy efficiency.

Applications

Cloud-Connected Sensors
Utilizing Wi-Fi for high-throughput data uploads to cloud platforms while maintaining low power consumption.
BLE Provisioning
Using Bluetooth Low Energy to simplify the setup and configuration of Wi-Fi credentials via a mobile application.
Smart Home Hubs
Acting as a gateway for local BLE sensors to communicate with internet-based management systems.
Battery-Powered IoT Nodes
Optimized for long-term operation with a standby current of 1uA and sleep current of 10.5uA.

Key Specifications

Type Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth Smart 4.x Low Energy (BLE)
Contents Board(s)
Frequency 2.4GHz
Utilized IC / Part ATWINC3400

Getting Started

Plug the ATWINC3400-XPRO into an Xplained Pro MCU board like the SAM D21 or SAM L21. Use the Atmel START or Microchip Harmony 3 software frameworks to access driver libraries and example Wi-Fi/BLE projects. The module supports WPA2 security and integrated TCP/IP networking stacks to offload processing from the host microcontroller.

ATWINC3400 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Type Utilized IC / Part Stock
ATWINC3400-XPRO (this part) Transceiver; 802.1.. ATWINC3400 45
ATWINC3400-XSTK Wireless (RF/RFID) MR210CA-3400 20

Also Consider

ATWINC1500-XPRO MCHPMicrochip Technology - Suitable for applications that only require Wi-Fi connectivity and do not need integrated BLE.