EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 14hrs 20min 27sec
Learn More →
BPS340-HA100P-4SG

BPS340-HA100P-4SG

Bourns Inc.
Pressure Sensor 100PSI (689.48kPa) Absolute Male - 0.059" (1.5mm) Tube 0 mV ~ 150 mV (5V) 4-SMD Module
Active482 in stock

Overview

The BPS340-HA100P-4SG is a high-pressure absolute sensor designed for reliability in harsh environments. It utilizes a micromachined MEMS element to provide an uncompensated analog millivolt output proportional to pressures up to 100 PSI. Its gold-plated Kovar port and backside-entry design allow for direct media monitoring of liquids and gases that might damage standard silicon sensors.

Why Choose This Part

This sensor offers exceptional 0.2% accuracy in a compact surface-mount package. The uncompensated millivolt output allows engineers to implement custom signal conditioning or calibration routines in their own MCU firmware. Its wide supply voltage range of 1.5V to 15V provides flexibility for integration into both low-power battery devices and 12V industrial rails.

Applications

Industrial Hydraulic Monitoring
Ideal for monitoring fluid pressure in hydraulic lines where media compatibility with gold-plated ports is required.
Pneumatic Systems
Used in compressed air systems and industrial automation to provide real-time pressure feedback for control loops.
Automotive Transmission Fluid
The absolute pressure measurement and harsh media resistance make it suitable for monitoring transmission or engine oil pressures.
HVAC Refrigerant Sensing
Provides accurate pressure data for refrigerant cycles in industrial cooling systems.

Key Specifications

Output 0 mV ~ 150 mV (5V)
Accuracy +/-0.2%
Port Size Male - 0.059" (1.5mm) Tube
Port Style Barbless
Output Type Analog Voltage
Mounting Type Surface Mount
Pressure Type Absolute
Package / Case 4-SMD Module
Maximum Pressure 200PSI (1378.95kPa)
Voltage - Supply 1.5V ~ 15V
Termination Style SMD (SMT) Tab
Operating Pressure 100PSI (689.48kPa)
Operating Temperature -40degC ~ 85degC
Supplier Device Package 4-SMD

Getting Started

To use this sensor, connect the bridge output to a high-precision instrumentation amplifier or a high-resolution ADC with a differential input. Because the output is uncompensated, you must implement temperature compensation and offset correction in your software using an external temperature sensor. Ensure the SMT tab is properly soldered to the PCB for mechanical stability when connecting tubes to the 1.5mm port.