IFXCY8CMBR3002-SX1IT
Overview
The CY8CMBR3002-SX1IT is a register-configurable CapSense controller designed for implementing up to two capacitive touch buttons or one proximity sensor without firmware development. This device features the patented CSD sensing algorithm and SmartSense auto-tuning to maintain performance across environmental changes and manufacturing variations. It operates over a wide voltage range from 1.8V to 5.5V, making it suitable for both battery-powered and mains-connected systems.
Why Choose This Part
The CapSense Express controller eliminates the need for complex firmware development by using a pre-configured register set and SmartSense auto-tuning to handle parasitic capacitance. It is highly power-efficient, consuming only 2.5uA in Deep Sleep mode and 22uA per sensor during active scanning. Integrated features like liquid tolerance and Flanking Sensor Suppression (FSS) ensure reliable operation in challenging environments where moisture or closely spaced sensors might cause false triggers.
Applications
Key Specifications
Getting Started
Engineers can configure the device using the EZ-Click software tool, which generates the required configuration registers for the I2C interface. Evaluation can be performed using the CY8CKIT-145-40XX PSoC 4000S Prototyping Kit or similar CapSense evaluation boards from Infineon. The device communicates over a standard I2C bus and provides an attention line interrupt to signal the host processor on touch events.




