EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts    CYBLE-214015-01
CYBLE-214015-01

IFXCYBLE-214015-01

Infineon Technologies
Bluetooth Bluetooth v4.2 Transceiver Module 2.4GHz ~ 2.5GHz Integrated, Trace Surface Mount
Active764 in stock
Datasheet Digi-Key Compare Prices

Overview

The CYBLE-214015-01 is a fully certified Bluetooth Low Energy (BLE) 4.2 module based on the Infineon PSoC 4 BLE architecture. It integrates a 48 MHz ARM Cortex-M0 core, 256 KB of Flash, and 32 KB of SRAM into a compact 11mm x 11mm SMT package with an onboard trace antenna. This module simplifies wireless design by combining the radio, stack, and programmable analog/digital peripherals in a single pre-certified solution.

Why Choose This Part

The module offers a highly integrated BOM by including a built-in oscillator, trace antenna, and extensive programmable logic that reduces the need for external components. It supports a wide operating voltage range from 1.71V to 5.5V, making it compatible with various battery chemistries and regulated power rails.

Applications

Industrial IoT Sensors
Utilizes the 12-bit ADC and programmable digital blocks to interface with industrial sensors while providing low-power wireless connectivity.
Wearable Medical Devices
Leverages the ultra-low power hibernate and deep sleep modes for long battery life in patient monitoring equipment.
Smart Home Appliances
Features integrated capacitive sensing (CapSense) and segment LCD drive for modern user interfaces in connected home devices.

Key Specifications

Protocol Bluetooth v4.2
Data Rate 1Mbps
Frequency 2.4GHz ~ 2.5GHz
Memory Size 256kB Flash, 32kB SRAM
Sensitivity -91dBm
Antenna Type Integrated, Trace
Mounting Type Surface Mount
Package / Case 32-SMD Module
Power - Output 3dBm
Voltage - Supply 1.71V ~ 5.5V
Serial Interfaces I2C, SPI, UART
RF Family/Standard Bluetooth
Current - Receiving 16.4mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 15.6mA

Getting Started

Developers should use the PSoC Creator IDE or ModusToolbox to configure the programmable digital blocks and BLE component. Hardware evaluation is best performed using the CY8CKIT-042-BLE-A Pioneer Kit or the CYBLE-214015-EVAL evaluation board. Programming and debugging are handled via the standard Serial Wire Debug (SWD) interface.

Also Consider

CYBLE-222014-01 IFXInfineon Technologies - A smaller 10mm x 10mm alternative within the same PSoC family for designs with tighter PCB space constraints.
The 2026 Embedded Online Conference