EmbeddedRelated.com
    Parts   Interface ICs  USB Interface ICs    USB 3.0 peripheral/controller ICs Family    CYUSB3014    CYUSB3014-BZXC
CYUSB3014-BZXC

IFXCYUSB3014-BZXC

Infineon Technologies
ARM9® EZ-USB FX3™ SuperSpeed USB Peripheral Controller Microcontroller IC External Program Memory 121-TFBGA
Active14,855 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The CYUSB3014-BZXC is a SuperSpeed USB 3.0 peripheral controller powered by an ARM926EJ-S core running at up to 200 MHz. It features the programmable General Programmable Interface (GPIF II), which allows it to interface with virtually any processor, FPGA, or image sensor to provide 5-Gbps USB 3.0 throughput.

Why Choose This Part

The integrated 100-MHz GPIF II provides a highly flexible parallel interface configurable to 8, 16, 24, or 32 bits, achieving data rates up to 400 MBps. It includes 512 KB of embedded SRAM for data buffering and features 32 physical endpoints to handle complex multi-stream USB traffic.

Applications

High-Definition Video Imaging
Transmitting uncompressed HD video streams from image sensors to a host PC using the high-bandwidth USB 3.0 interface.
FPGA Data Offloading
Acting as a high-speed data pipe for FPGAs in data acquisition or software-defined radio systems via the 32-bit GPIF II bus.
Industrial Vision Systems
Enabling machine vision cameras to deliver high-frame-rate data with low latency for real-time inspection.
Medical Imaging
Processing and transferring high-resolution scans from ultrasound or X-ray equipment to diagnostic workstations.

Key Specifications

RAM Size 512K x 8
Interface GPIF, I2C, I2S, SPI, UART, USB
Applications SuperSpeed USB Peripheral Controller
Mounting Type Surface Mount
Number of I/O 60
Core Processor ARM9
Package / Case 121-TFBGA
Voltage - Supply 1.15V ~ 1.25V
Controller Series CYUSB
Program Memory Type External Program Memory
Operating Temperature 0degC ~ 70degC
Supplier Device Package 121-FBGA (10x10)

Getting Started

Start development with the CYUSB3KIT-003 EZ-USB FX3 SuperSpeed Explorer Kit and the FX3 SDK, which includes the Eclipse-based EZ-USB Suite. Engineers can use the GPIF II Designer tool to graphically configure the interface state machine and timing to match external hardware.

Part of USB 3.0 peripheral/controller ICs family » CYUSB3014

CYUSB3014 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Temp Range Stock
CYUSB3014-BZXC (this part) 0degC ~ 70degC 14,855
CYUSB3014-BZXI -40degC ~ 85degC 739

Also Consider

FT2232HL FTDI Chip - A simpler USB 2.0 High-Speed alternative for designs that do not require 5-Gbps SuperSpeed performance.
CYUSB2014-BZXC IFXInfineon Technologies - The FX2LP equivalent for applications limited to USB 2.0 bandwidth while maintaining a similar GPIF architecture.

Categories

Interface ICs > USB Interface ICs Microcontrollers > Infineon Consumer Electronics > USB & Charging