DFRobot DFRduino Nano V3.1
Overview
The DFR0010 is a compact, breadboard-friendly development board based on the ATmega328 microcontroller. It provides the same functionality as an Arduino Uno but in a significantly smaller footprint, featuring an integrated USB interface for programming and power.
Why Choose This Part
This board offers a high power-to-size ratio with 32KB of flash memory and 14 GPIO pins in a miniature form factor. It supports a wide input voltage range from 6V to 20V via the VIN pin, providing flexibility for various power sources while maintaining 5V logic levels.
Applications
Key Specifications
Getting Started
Program the board using the Arduino IDE by selecting Arduino Nano from the Boards menu. Connect to a PC via the onboard USB port for both serial communication and firmware uploads. Use the 1x15 pin headers to interface with sensors and actuators on a standard 0.1-inch pitch breadboard.
Also Consider
Arduino
- The original official reference design for the Nano platform with identical pinout and ATmega328 MCU.
Arduino
- A more modern alternative featuring the ATmega4809 processor with increased RAM and flash memory.
Arduino
- The standard full-sized platform for engineers who prefer the Uno shield ecosystem over breadboard mounting.
