EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 14hrs 10min 39sec
Learn More →
DG409DYZ-T

RENDG409DYZ-T

Renesas Electronics Corporation
2 Circuit IC Switch 4:1 100Ohm 16-SOIC
Active2,284 in stock

Overview

The DG409DYZ-T is a high-performance CMOS dual 4-channel differential analog multiplexer designed for precision signal switching. It operates with dual supplies ranging from +/-5V to +/-20V or a single supply up to 34V, offering low power consumption of 0.2mA typical. This device is an improved upgrade for the industry-standard DG509A, providing lower on-resistance and faster switching times.

Why Choose This Part

The DG409DYZ-T features a maximum on-state resistance of 100 Ohms and very low charge injection, which minimizes measurement errors in high-impedance circuits. Its TTL and CMOS compatible logic inputs simplify interfacing with microcontrollers even when running the analog stage at high voltages. The robust 16-SOIC package and wide operating temperature range of -40 to 85 degrees Celsius make it suitable for industrial environments.

Applications

Data Acquisition Systems
Used to multiplex multiple differential sensor inputs into a single analog-to-digital converter (ADC) while maintaining signal integrity.
Sample and Hold Circuits
Excels in precision signal capture due to low charge injection of 20pC and fast 150ns switching speeds.
Automatic Test Equipment
Provides reliable signal routing in high-density testers where low power and high voltage rails are required.
Communication Systems
Handles analog signal switching in back-end RF processing or audio routing with low crosstalk.

Key Specifications

Mounting Type Surface Mount
Package / Case 16-SOIC (0.154", 3.90mm Width)
Switch Circuit SP4T
Charge Injection 20pC
Number of Circuits 2
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 16-SOIC
On-State Resistance (Max) 100Ohm
Switch Time (Ton, Toff) (Max) 150ns, 150ns
Voltage - Supply, Dual (V+/-) +/-5V ~ 20V
Voltage - Supply, Single (V+) 5V ~ 34V
Current - Leakage (IS(off)) (Max) 500pA
Multiplexer/Demultiplexer Circuit 4:1
Channel Capacitance (CS(off), CD(off)) 3pF, 14pF
Channel-to-Channel Matching (ΔRon) 15Ohm (Max)

Getting Started

To evaluate this multiplexer, ensure that the power supply rails (V+ and V-) are bypassed with 0.1uF ceramic capacitors located close to the device pins to minimize switching noise. Logic control lines A0 and A1 select the active channel, and the Enable pin must be driven high for operation. Standard 1.27mm pitch SOIC breakout boards can be used for breadboard prototyping.

Also Consider

ADG409BRZ Analog Devices - A direct functional equivalent offering very low power consumption and high reliability for precision instrumentation.