EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 09hrs 08min 56sec
Learn More →
DIX4192IPFBRQ1

TIDIX4192IPFBRQ1

Texas Instruments
Audio Audio Transceiver 4 Channel 48-TQFP (7x7)
Active276 in stock

Overview

The DIX4192IPFBRQ1 is a high-performance, CMOS-based digital audio interface transceiver designed for professional and automotive audio systems. It integrates a 4-channel digital audio receiver (DIR) and transmitter (DIT) with hardware or software control via I2C or SPI. This AEC-Q100 qualified device supports differential line drivers and is optimized for 1.8V core and 3.3V I/O operation.

Why Choose This Part

The device offers exceptional flexibility with its integrated DARS (Digital Audio Reference Signal) support and low-jitter clock recovery. Its low power consumption of 5.1mA at 1.8V VDD makes it suitable for thermally constrained automotive environments. The inclusion of both I2C and SPI interfaces allows for seamless integration with a wide variety of host microcontrollers.

Applications

Automotive Infotainment Systems
Used as the primary digital audio interface for vehicle head units and media hubs to manage multi-channel audio routing.
Professional Audio Interfaces
Acts as the AES3 or S/PDIF transceiver for mixing consoles and digital audio workstations.
Digital Audio Distribution
Facilitates reliable transmission of PCM audio data over long cable runs using its differential output capabilities.

Key Specifications

Function Audio Transceiver
Interface I2C, SPI
Applications Audio
Mounting Type Surface Mount
Package / Case 48-TQFP
Specifications Differential Output
Voltage - Supply 1.65V ~ 1.95V
Number of Channels 4
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 48-TQFP (7x7)

Getting Started

Designers should begin by reviewing the TI Precision Designs for digital audio routing and ensuring proper decoupling for the 1.8V and 3.3V supply rails. Configuration is typically handled through the I2C/SPI control port to set the sampling frequency and clock source. Evaluation can be performed using the DIX4192EVM evaluation module, which provides access to all 48 pins of the TQFP package.