EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 10hrs 52min 45sec
Learn More →
DRV5013ADQDBZR

TIDRV5013ADQDBZR

Texas Instruments
Digital Switch Latch Open Drain Hall Effect SOT-23-3
Active6,077 in stock

Overview

The DRV5013ADQDBZR is a digital-latch Hall effect sensor designed for high-performance position sensing in rugged environments. It operates across a wide supply voltage range from 2.7V to 38V and provides an open-drain output that changes state based on magnetic poles. The device is temperature compensated to ensure consistent magnetic switching points across its full operating range of -40 degrees C to 125 degrees C.

Why Choose This Part

The sensor features a robust 38V supply rating and integrated reverse supply protection, making it highly resilient to industrial power transients. Its digital latching behavior, with a 5mT trip and -5mT release point, ensures stable switching even in the presence of mechanical vibration or slight magnetic drift. The SOT-23 package and open-drain output allow for easy integration with various microcontroller logic levels using a simple pull-up resistor.

Applications

BLDC Motor Commutation
Used in brushless DC motors to detect rotor position for precise electronic commutation.
Rotary Encoding
Pairs with a multi-pole ring magnet to provide incremental speed and direction feedback in industrial knobs or wheels.
Mechanical Limit Switching
Replaces mechanical microswitches in harsh environments where dust or moisture would cause contact failure.
Flow Rate Measurement
Monitors the rotation of an internal impeller or turbine within a liquid or gas flow meter.

Key Specifications

Features Temperature Compensated
Function Latch
Technology Hall Effect
Output Type Open Drain
Polarization South Pole
Mounting Type Surface Mount
Sensing Range 5mT Trip, -5mT Release
Package / Case TO-236-3, SC-59, SOT-23-3
Test Condition -40degC ~ 125degC
Voltage - Supply 2.7V ~ 38V
Operating Temperature -40degC ~ 125degC (TA)
Current - Output (Max) 30mA
Current - Supply (Max) 2.7mA (Typ)
Supplier Device Package SOT-23-3

Getting Started

To evaluate this sensor, connect a pull-up resistor (typically 10k ohms) between the OUT pin and your logic supply (VCC). Monitor the output using an oscilloscope or a microcontroller GPIO while passing a south-pole magnet near the branded side of the SOT-23 package to trigger the latch. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VCC and GND pins for stable operation.

DRV5013 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
DRV5013ADQDBZR (this part) 3-236 6,077
DRV5013ADQLPG 3-226 9,158
DRV5013ADQLPGM 3-226 7,233
DRV5013ADQDBZT 3-236 6,393
Also available as: DRV5013ADQDBZRQ1

Also Consider

DRV5013ADQDBZT TITexas Instruments - This is the small-reel variant of the same part, ideal for lower-volume prototyping or repair.
APS12205LLHALT Allegro MicroSystems - An alternative Hall effect latch with high-temperature stability often used in similar automotive and industrial motor applications.