EE-SX471
Overview
The EE-SX471 is an L-shaped through-beam photomicrosensor designed for precise object detection in industrial environments. It features a 5mm sensing slot and an NPN open-collector output that is active during Light-ON conditions. With a wide supply voltage range from 5V to 24V, it integrates easily with various logic levels and PLC systems.
Why Choose This Part
The sensor's L-shaped chassis and connector-based interface simplify mounting and maintenance in tight spaces. Its wide 5V to 24V supply range and 100mA current rating allow for direct driving of small relays or logic gates without additional level-shifting circuitry. The PBT housing provides durability and a high dielectric withstanding voltage of 1000V for industrial reliability.
Applications
Key Specifications
Getting Started
Connect the Vcc and GND pins to a DC power source between 5V and 24V. Use a pull-up resistor on the NPN open-collector output pin if your microcontroller does not have internal pull-ups enabled. Verify the Light-ON logic by ensuring the output pulls low when the optical path between the emitter and detector is unobstructed.
EE Family
Comparing specs that differ across variants. The current part is highlighted.
| Part Number | Package | Current - Supply | Output Configuration | Stock |
|---|---|---|---|---|
| EE-SX471 (this part) | Module, Connector | 35 mA | NPN - Open Collect.. | 382 |
| EE-SX671 | Module, Connector | 12 mA | NPN - Open Collector | 997 |
| EE-SX670 | Module, Connector | 12 mA | PNP - Open Collector | 1,580 |
| EE-SX672 | Module, Connector | 12 mA | NPN - Open Collector | 7,442 |
| EE-SX872 | Module, Wire Leads | 35 mA | NPN - Open Collect.. | 8,962 |
| EE-SX674 | Module, Connector | 12 mA | PNP - Open Collector | 123 |
| EE-SX673 | Module, Connector | 12 mA | NPN - Open Collector | 8 |




