Parts Development Boards ESP32 Dev Boards ESP32-C3-DEVKITM-1-N4X

ESP32-C3-DEVKITM-1-N4X

Name: ESP32-C3-DEVKITM-1-N4X
Brand: Espressif Systems

Espressif Systems

Multiprotocol Development Tools ESP32-C3-DevKitM-1 is an entry-level development board equipped with ESP32-C3-MINI-1 or ESP32-C3-MINI-1U. Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper

Active934 in stock

Datasheet Digi-Key Mouser Compare Prices

Overview

Evaluation / development board built around the ESP32-C3-MINI-1 module providing 2.4 GHz 802.11 b/g/n Wi-Fi and Bluetooth 5.x Low Energy. The board exposes module I/O for prototyping wireless IoT endpoints and BLE peripherals. It is intended for software development, hardware bring-up, and quick proof-of-concept designs.

Why Choose This Part

Integrates Wi-Fi and Bluetooth 5.x BLE in a small development board form factor, letting engineers prototype wireless applications quickly. Wide software support from Espressif (ESP-IDF) plus community support and Arduino cores makes firmware development and example reuse straightforward. Breakout of module signals simplifies hardware integration and testing during early design stages.

Applications

Battery-powered IoT sensors

Use for low-power Wi-Fi or BLE sensors that report telemetry to a cloud or gateway.

BLE peripherals and beacons

Develop Bluetooth Low Energy peripherals such as asset trackers, beacons, or wearable interfaces.

Wi-Fi connected control nodes

Prototype smart plugs, relays, or other connected actuators that need 2.4 GHz Wi-Fi.

Edge data aggregation

Collect and preprocess sensor data at the edge before forwarding to a server.

Key Specifications

Type Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth 5.x (BLE)

Contents Board(s)

Frequency 2.4GHz

Utilized IC / Part ESP32-C3-MINI-1

Getting Started

Refer to Espressif documentation and the ESP-IDF development framework to build and flash firmware; the board is also supported by the Arduino core for ESP32 for simpler sketches. Connect the board to a host over USB, install the appropriate serial driver if needed, and use idf.py or esptool.py to flash firmware. Check Espressif examples and sample projects for Wi-Fi and BLE to accelerate development.