EmbeddedRelated.com
ESP32-C3-MINI-1-N4X

ESP32-C3-MINI-1-N4X

Espressif Systems
Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz Integrated, Trace Surface Mount
Active2,439 in stock

Overview

The ESP32-C3-MINI-1-N4X is a compact, highly integrated Wi-Fi and Bluetooth LE 5.0 module based on the RISC-V architecture. It features 4MB of embedded flash and a single-core 160MHz processor, designed to provide cost-effective connectivity for power-sensitive IoT applications. The module's small 13.2mm x 16.6mm footprint and integrated PCB trace antenna make it suitable for space-constrained designs.

Why Choose This Part

This module transitions from Xtensa to a RISC-V core, offering a modern instruction set and simplified development at a lower price point than previous ESP32 generations. It includes advanced Wi-Fi features like WMM and TX/RX A-MPDU for better throughput, alongside a highly efficient power profile for battery-operated devices.

Applications

Smart Home Appliances
Integrating Wi-Fi and BLE connectivity into small appliances like light switches, plugs, and sensors for remote control and automation.
Industrial IoT Sensors
Deploying battery-powered wireless nodes that require the 130uA light-sleep or 5uA standby current modes to extend field life.
Wireless POS Terminals
Handling secure wireless transactions and peripheral connectivity using the 400KB SRAM and built-in hardware security features.
Health Monitoring Wearables
Collecting sensor data and transmitting it to mobile devices via Bluetooth LE while maintaining a compact physical profile.

Key Specifications

Protocol 802.11b/g/n, Bluetooth v5.0
Data Rate 150Mbps
Frequency 2.4GHz
Memory Size 4MB Flash, 384kB ROM, 408kB SRAM
Sensitivity -104dBm
Antenna Type Integrated, Trace
Mounting Type Surface Mount
Package / Case 61-SMD Module
Power - Output 20.5dBm
Voltage - Supply 3V ~ 3.6V
Serial Interfaces ADC, GPIO, I2C, I2S, JTAG, PWM, SPI, UART, USB
RF Family/Standard Bluetooth, WiFi
Utilized IC / Part ESP32-C3FH4
Current - Receiving 82mA ~ 86mA
Operating Temperature -40degC ~ 85degC (TA)
Current - Transmitting 100mA ~ 350mA

Getting Started

Developers can use the Espressif IoT Development Framework (ESP-IDF) or the Arduino IDE for software development. The module is typically evaluated using the ESP32-C3-DevKitM-1 development board. Firmware is flashed via the UART pins, and the internal co-existence mechanism ensures stable performance when using Wi-Fi and Bluetooth simultaneously.

Dev Boards

Development boards and breakout modules featuring the ESP32-C3-MINI-1-N4X or compatible chips — ready to use for prototyping.

ESP32-C3-DEVKITM-1-N4X Espressif Systems
ESP32-C3-MINI-1 ESP32-C 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board
Digi-Key Mouser 120 in stock
ESP32-C3-DEVKITC-02U Espressif Systems
The ESP32-C3-DEVKITC-02U transceiver evaluation board by Espressif Systems is a development tool designed for RF, RFID,
Digi-Key 123 in stock
ESP32-C3 ESP32-C Bluetooth® 5.x (BLE) Transceiver 2.4GHz Evaluation Board
Digi-Key 108 in stock
The ESP32-C3-AWS-EXPRESSLINK-DEVKIT evaluation board from Espressif Systems is designed for a wide range of RF, RFID, a
Digi-Key Mouser 2 in stock
ESP32-C3-DevKitM-1 Espressif
Lower-cost Espressif dev kit with BLE and Wi-Fi capabilities if Wi-Fi 6 or 802.15.4 are not required.
Digi-Key 213 in stock
Part of Espressif ESP32 SoCs family » ESP32-C3

ESP32-C3 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Memory Package Interfaces Sensitivity Antenna Type Utilized IC / Part Stock
ESP32-C3-MINI-1-N4X (this part) 4MB SMD-61 ADC, GPIO, I2C, I2.. -104dBm Integrated, Trace C3FH4-32 2,439
ESP32-C3-WROOM-02U-N4 4MB SMD-19 ADC, GPIO, I2C, I2.. -98dBm Antenna Not Includ.. C3-32 2,116
ESP32-C3-WROOM-02-H4 4MB SMD-32 GPIO, I2C, I2S, SP.. -105dBm PCB Trace C3-32 4,650
ESP32-C3-DEVKITC-02U C3-32 123
ESP32-C3-DEVKITM-1-N4X C3-32 120
ESP32-C3-MINI-1U 4MB SMD-61 ADC, GPIO, I2C, I2.. -104dBm Antenna Not Included C3FH4-32 3,117
ESP32-C3-WROOM-02-N4 4MB SMD-19 GPIO, I2C, I2S, SP.. -105dBm PCB Trace C3-32 2,289
ESP32-C3-AWS-ExpressLink-DevKit C3-32 2
ESP32-C3-WROOM-02 4MB SMD-19 GPIO, I2C, I2S, SP.. -105dBm PCB Trace C3-32 6,393
ESP32-C3-WROOM-02U 4MB SMD-19 ADC, GPIO, I2C, I2.. -98dBm Antenna Not Includ.. C3-32 6,383
ESP32-C3-LYRA PCB Trace Antenna(.. C3-32
Also available as: ESP32-C3-WROOM-02N, ESP32-C3-MINI-1-N8

Also Consider

ESP32-WROOM-32E Espressif Systems - Offers dual-core Xtensa performance and classic Bluetooth support if more processing power is required.
ESP32-C3-WROOM-02 Espressif Systems - Provides the same RISC-V core but in a larger, more common pin-out compatible with WROOM series footprints.