FH12-50S-0.5SH(55)
Hirose Electric
Same family and pitch with 50 contacts to provide a higher-signal alternative while retaining the FH12 mating interface.
2,221 in stock
Overview
The FH12-50S-0.5SH(55) is a 50-position FPC/FFC connector from Hirose Electric featuring a 0.5mm pitch and a right-angle, bottom-contact orientation. It utilizes a flip-lock ZIF (Zero Insertion Force) mechanism to ensure secure cable retention within a low-profile 2.00mm height above the PCB.
Why Choose This Part
The flip-lock actuator provides a clear tactile click for assembly verification and maintains high retention force without requiring a large vertical clearance. Its standard 0.5mm pitch and 2.00mm height make it a versatile choice for space-constrained designs needing high signal density.
Applications
High-Density Display Interfaces
Connecting high-resolution small displays where 50 signal lines are required for parallel data or high-pin-count LVDS signals.
Internal Module Interconnects
Linking sub-assemblies such as camera modules or sensor arrays to a main logic board in compact consumer electronics.
Medical Handheld Devices
Reliable signal routing in portable diagnostic tools that require a thin 0.30mm FFC/FPC cable thickness.
Key Specifications
Pitch
0.020" (0.50mm)
Features
Zero Insertion Force (ZIF)
Termination
Solder
Mounting Type
Surface Mount, Right Angle
Cable End Type
Straight
Contact Finish
Gold
Flat Flex Type
FFC, FPC
Voltage Rating
50V
Locking Feature
Flip Lock
Contact Material
Phosphor Bronze
Housing Material
Polyamide (PA), Nylon
Actuator Material
Polyphenylene Sulfide (PPS)
FFC, FCB Thickness
0.30mm
Height Above Board
0.079" (2.00mm)
Number of Positions
50
Operating Temperature
-40degC ~ 85degC
Connector/Contact Type
Contacts, Bottom
Material Flammability Rating
UL94 V-0
