FH12-50S-0.5SVA(54)
Hirose Electric Co Ltd
50 Position FFC, FPC Connector Contacts, Vertical - 1 Sided 0.020" (0.50mm) Surface Mount
Active4,425 in stock
Overview
The FH12-50S-0.5SVA(54) is a 50-position vertical FPC/FFC connector featuring a 0.5mm pitch and a Zero Insertion Force (ZIF) design. This surface-mount component utilizes a flip-lock actuator to secure flexible printed circuits with high reliability and a 50V voltage rating. It is designed for applications requiring high-density vertical cable entry in space-constrained board layouts.
Why Choose This Part
The vertical orientation allows for efficient use of PCB real estate by enabling cable entry perpendicular to the board surface. The flip-lock ZIF mechanism ensures a secure, vibration-resistant connection with low insertion force, while the gold-plated phosphor bronze contacts provide reliable electrical performance over a 20-cycle mating life.
Applications
High-Resolution Display Interconnects
Connecting 50-pin TFT or LCD modules to a vertical mainboard interface.
Internal Peripheral Cabling
Routing signals between stacked PCBs or internal daughterboards in compact enclosures.
Imaging Sensor Interfaces
Linking high-pin-count camera modules to image processing units in industrial or consumer hardware.
Handheld Device Internals
Providing vertical cable management for keyboards or multi-sensor arrays in portable electronics.
Key Specifications
Pitch
0.020" (0.50mm)
Features
Solder Retention, Zero Insertion Force (ZIF)
Termination
Solder
Mounting Type
Surface Mount
Cable End Type
Straight
Contact Finish
Gold
Flat Flex Type
FFC, FPC
Voltage Rating
50V
Locking Feature
Flip Lock
Contact Material
Phosphor Bronze
Housing Material
Polyamide (PA), Nylon
Actuator Material
Polyphenylene Sulfide (PPS)
FFC, FCB Thickness
0.30mm
Height Above Board
0.142" (3.60mm)
Number of Positions
50
Operating Temperature
-40degC ~ 85degC
Connector/Contact Type
Contacts, Vertical - 1 Sided
Material Flammability Rating
UL94 V-0
Also Consider
FH12-50S-0.5SH(55)
Hirose Electric Co Ltd
- Choose this for horizontal (right-angle) cable entry instead of vertical mounting on the same 0.5mm pitch.
