EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 10hrs 13min 55sec
Learn More →
FM25V10-GTR

IFXFM25V10-GTR

Infineon Technologies
FRAM (Ferroelectric RAM) Memory IC 1Mbit SPI 40 MHz 8-SOIC
Active8,586 in stock

Overview

The FM25V10-GTR is a 1Mbit non-volatile memory employing an advanced ferroelectric process to provide high-speed SPI performance. Unlike standard Flash or EEPROM, this F-RAM device performs write operations at bus speed with no write delays and offers extreme endurance of 100 trillion cycles. It operates over a 2V to 3.6V range with very low power consumption, making it ideal for systems requiring frequent or rapid data logging.

Why Choose This Part

This device eliminates the need for wear-leveling software due to its 10^14 write cycle endurance and removes the 5-10ms polling delays typical of EEPROM. Its extremely low standby current of 90 microamps and active current of 3.0mA at 40MHz make it superior for battery-constrained applications.

Applications

High-Frequency Data Logging
Capturing sensor data or system states at high intervals where the wear limits of EEPROM would be exceeded within months.
Power-Fail Event Recording
Utilizing NoDelay writes to instantly capture critical system parameters the moment a power loss is detected without needing large hold-up capacitors.
Industrial Control Configuration
Storing calibration constants and dynamic settings in PLC or motor control environments that require 151-year data retention.
Energy Harvesting Systems
Performing memory writes at extremely low current levels (0.3mA at 1MHz) where the high peak power of Flash programming is prohibited.

Key Specifications

Technology FRAM (Ferroelectric RAM)
Memory Size 1Mbit
Memory Type Non-Volatile
Memory Format FRAM
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Clock Frequency 40 MHz
Memory Interface SPI
Voltage - Supply 2V ~ 3.6V
Memory Organization 128K x 8
Operating Temperature -40degC ~ 85degC (TA)
Supplier Device Package 8-SOIC

Getting Started

The FM25V10-GTR uses a standard SPI interface (Mode 0 and 3), allowing it to be controlled by any microcontroller SPI peripheral. For evaluation, use an 8-pin SOIC to DIP adapter or an Infineon CY15FRAMKIT-002 development kit. Firmware integration is straightforward as the device responds to standard SPI opcodes without the need for specialized Flash page-erase algorithms.

Also Consider

MR25H10CDC Everspin Technologies Inc. - An MRAM alternative that provides similar non-volatile performance with theoretically unlimited endurance and high-speed SPI capability.