EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 09hrs 22min 47sec
Learn More →
FOD3120SD

ONFOD3120SD

onsemi
3A Gate Driver Optical Coupling 5000Vrms 1 Channel 8-SMD
Active73,842 in stock

Overview

The FOD3120SD is a 3A output current gate drive optocoupler designed to drive power IGBTs and MOSFETs in high-frequency switching applications. It provides 5000Vrms of galvanic isolation, ensuring sensitive control circuitry is protected from high-voltage transients in power stages.

Why Choose This Part

This device delivers a high peak output current of 3A, which is sufficient for driving most 1200V/100A IGBTs. It features a wide operating voltage range of 15V to 30V and incorporates Under Voltage Lock Out (UVLO) with hysteresis to prevent erratic switching during power-up or brown-out conditions.

Applications

Industrial Inverters
Used to bridge the gap between low-voltage PWM controllers and high-voltage power transistors in AC motor drives.
Uninterruptible Power Supplies (UPS)
Provides isolated gate driving for the power conversion stages to maintain system reliability during power switching.
Switching Power Supplies
Ideal for high-efficiency DC-DC converters requiring fast switching speeds and high noise immunity.
Induction Heating
Drives the power switches used in high-frequency induction heating systems where isolation and high peak current are required.

Key Specifications

Technology Optical Coupling
Mounting Type Surface Mount
Package / Case 8-SMD, Gull Wing
Approval Agency UL
Number of Channels 1
Voltage - Isolation 5000Vrms
Current - Peak Output 3A
Operating Temperature -40degC ~ 100degC
Rise / Fall Time (Typ) 60ns, 60ns
Supplier Device Package 8-SMD
Voltage - Output Supply 15V ~ 30V
Current - Output High, Low 2A, 2A
Pulse Width Distortion (Max) 100ns
Voltage - Forward (Vf) (Typ) 1.5V
Current - DC Forward (If) (Max) 25 mA
Propagation Delay tpLH / tpHL (Max) 400ns, 400ns
Common Mode Transient Immunity (Min) 35kV/us

Getting Started

To implement the FOD3120SD, ensure a 0.1uF bypass capacitor is placed as close as possible to the VCC and GND pins to handle high-frequency switching noise. Design the input side with a current-limiting resistor to maintain an LED drive current (IF) between 7mA and 16mA for optimal performance.

Also Consider

TLP250H Toshiba - Offers a smaller footprint and lower power consumption for designs with tighter space requirements.