FT2232H Mini Module
Overview
The FT2232H Mini Module is a USB-to-serial/FIFO development module that breaks out the high-speed FT2232H IC to a standard 0.1-inch pitch header format. It enables USB 2.0 Hi-Speed communication at 480Mbps and supports a wide variety of industry-standard interfaces including UART, JTAG, SPI, and I2C. The module is USB-powered and handles the entire USB protocol on-chip, simplifying the integration of high-speed connectivity into existing hardware designs.
Why Choose This Part
The module features two independent channels that can be configured for different interface modes simultaneously. It is designed for rapid integration with a small footprint and standard 26-pin headers that are compatible with breadboards and prototyping sockets. Engineers benefit from FTDI's mature driver support (VCP and D2XX), which eliminates the need for complex USB firmware development.
Applications
Key Specifications
Getting Started
Connect the module to a host PC via a USB Type B cable; it is powered directly from the USB bus and requires no external supply for basic operation. Install the FTDI D2XX or Virtual COM Port (VCP) drivers to begin communicating with the dual channels. For custom software development, utilize the FTDI ChipLib or third-party open-source libraries like libFTDI to implement SPI, JTAG, or I2C protocols over the Multi-Protocol Synchronous Serial Engine (MPSSE).
FT2232H Family
Comparing specs that differ across variants. The current part is highlighted.
| Part Number | Function | Interface | Package | Stock |
|---|---|---|---|---|
| FT2232H MINI MODULE (this part) | USB 2.0 to I2C, JT.. | — | — | 1,275 |
| FT2232H-56Q MINI MDL | Bridge, USB to UART | FIFO | Module | 60 |
| FT2232H-56Q-REEL | Bridge, USB to UAR.. | UART, FIFO | VFQFN-56 | — |
