EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts    G6B-2114P-US-DC5
G6B-2114P-US-DC5

G6B-2114P-US-DC5

Omron
Same mechanical and contact configuration but with a 5 V coil for designs that need direct drive from 5 V logic or MCU-adjacent drivers.
Active3,727 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The G6B-2114P-US-DC5 is a compact, through-hole PCB power relay featuring a unique DPST-NO/NC (1 Form A, 1 Form B) contact configuration. It is designed for low power consumption, requiring approximately 300 mW to operate while switching loads up to 5 A at 250 VAC or 30 VDC. Its fully sealed construction makes it suitable for harsh environments where protection against flux or cleaning solvents is required.

Why Choose This Part

This relay provides high dielectric strength of 3,000 VAC between coil and contacts and an impulse withstand voltage of 6 kV. The 5 VDC coil voltage allows for straightforward integration with 5 V logic levels through a simple transistor driver or dedicated relay driver IC.

Applications

HVAC Control Systems
Managing small motors and fan speeds where simultaneous normally-open and normally-closed switching is required for interlocking.
Industrial Logic Controllers
Interfacing 5V logic signals with high-voltage actuators or indicator lamps in automated production lines.
Smart Home Appliances
Providing a safety-critical disconnect or bypass path in power-sensitive consumer electronics.
Test and Measurement
Switching signal paths or power rails in automated test equipment where isolation of 3,000 VAC is necessary.

Key Specifications

Coil Type Non Latching
Relay Type General Purpose
Seal Rating Sealed - Fully
Coil Current 60 mA
Coil Voltage 5VDC
Contact Form DPST-NO/NC (1 Form A, 1 Form B)
Operate Time 10 ms
Release Time 10 ms
Mounting Type Through Hole
Approval Agency CSA, TUV, UR
Contact Material Silver Alloy, Cadmium Free
Switching Voltage 380VAC, 125VDC - Max
Termination Style PC Pin
Load - Max Switching 1900VA, 625W
Must Operate Voltage 4 VDC
Must Release Voltage 0.5 VDC
Operating Temperature -25degC ~ 70degC
Contact Rating (Current) 5 A

Getting Started

When designing for this relay, include a flyback diode (such as a 1N4148) across the coil pins to protect the driving transistor from inductive spikes. Ensure the PCB layout accounts for the 5 A current path with sufficient trace width and maintains clearance distances to meet the 3,000 VAC isolation rating.

G6B-2114P-US Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Coil Current Coil Voltage Must Operate Voltage Must Release Voltage Stock
G6B-2114P-US-DC5 (this part) 60 mA 5V 4 V 0.5 V 3,727
G6B-2114P-US-DC12 25 mA 12V 9.6 V 1.2 V 2,751
G6B-2114P-US-DC24 12.5 mA 24V 19.2 V 2.4 V 9,933

Also Consider

G5Q-14 DC5 Omron - A lower-cost SPDT alternative for simple changeover tasks if the DPST-NO/NC configuration is not strictly required.
The 2026 Embedded Online Conference