EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
25days 06hrs 27min 17sec
Learn More →
HCPL-060L-500E

HCPL-060L-500E

Broadcom Limited
Logic Output Optoisolator 15MBd Open Collector, Schottky Clamped 3750Vrms 1 Channel 10kV/µs CMTI 8-SO Tall
Active6,754 in stock

Overview

The HCPL-060L-500E is a high-speed, 15 MBd optocoupler designed for low-power logic isolation in 3.3V and 5V systems. It features an open-collector Schottky-clamped output and provides a high common mode transient immunity (CMTI) of 10kV/us minimum. This single-channel device is housed in a compact SO-8 package, making it suitable for dense PCB layouts requiring robust electrical isolation up to 3750Vrms.

Why Choose This Part

The device supports dual-supply voltages from 2.7V to 5.5V, ensuring compatibility with both legacy 5V and modern 3.3V LVTTL/LVCMOS logic. Its 15 MBd data rate and low 75ns maximum propagation delay enable high-performance data paths. Additionally, the Schottky-clamped output ensures fast switching speeds with minimal power consumption across the full -40C to +85C temperature range.

Applications

Isolated Line Receiver
Ideal for high-speed digital data transmission across long lines where ground loops or noise must be eliminated.
Microprocessor System Interfaces
Safe interfacing between low-voltage microcontrollers and high-voltage peripherals or power stages.
Digital Isolation for A/D and D/A
Protects sensitive mixed-signal components from digital switching noise and high-voltage transients.
Switching Power Supply Feedback
Provides isolated feedback signals in power converters while maintaining high transient immunity.

Key Specifications

Data Rate 15MBd
Input Type DC
Output Type Open Collector, Schottky Clamped
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
Voltage - Supply 2.7V ~ 3.6V, 4.5V ~ 5.5V
Number of Channels 1
Voltage - Isolation 3750Vrms
Operating Temperature -40degC ~ 85degC
Inputs - Side 1/Side 2 1/0
Rise / Fall Time (Typ) 24ns, 10ns
Supplier Device Package 8-SO Tall
Current - Output / Channel 50 mA
Voltage - Forward (Vf) (Typ) 1.5V
Current - DC Forward (If) (Max) 20mA
Propagation Delay tpLH / tpHL (Max) 75ns, 75ns
Common Mode Transient Immunity (Min) 10kV/us

Getting Started

When designing with the HCPL-060L-500E, place a 0.1uF bypass capacitor as close as possible to the VDD and GND pins to ensure stable high-speed operation. Since it features an open-collector output, a pull-up resistor is required on the output pin to reach the desired logic high level. Ensure the input LED forward current is maintained around 5mA to 10mA for optimal switching performance and reliability.

Also Consider

6N137S1 Everlight Electronics - A common 10MBd alternative often used when slightly lower speeds are acceptable in a similar SO-8 footprint.