EmbeddedRelated.com
The 2026 Embedded Online Conference
    Parts   Test & Debug Tools  Programmers    HW-USB-II-G
HW-USB-II-G

HW-USB-II-G

AMD
EEPROM, FPGA, PLD - Programmer (In-Circuit/In-System)
Active1,005 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The AMD HW-USB-II-G, also known as the Platform Cable USB II, is an in-circuit/in-system programmer for EEPROMs, FPGAs, and PLDs. It provides a robust interface between a host computer and target AMD devices, facilitating design, debugging, and programming operations. The cable connects to a PC via USB 2.0 and operates within a supply voltage range of 4V to 5.25V.

Why Choose This Part

This programmer offers a direct and reliable USB 2.0 interface for efficient programming and debugging of AMD FPGAs, PLDs, and EEPROMs. Its wide operating temperature range of 0C to 70C allows for use in various development environments. With a run current of less than 150mA, it is energy efficient for typical development setups.

Applications

FPGA Development and Debugging
Enables in-system programming and debugging of AMD FPGAs, allowing engineers to load bitstreams, configure devices, and perform real-time analysis during the development cycle.
PLD Configuration
Used to configure AMD Programmable Logic Devices (PLDs) with custom logic designs directly on the target board, streamlining the prototyping and production processes.
EEPROM Programming
Facilitates the programming of compatible EEPROMs, often used for storing configuration data or bootloaders for embedded systems.
Embedded System Prototyping
Serves as an essential tool for bringing up and testing new embedded hardware designs that incorporate AMD programmable logic, by providing a direct programming interface.
Production Programming
Suitable for low-volume production programming of AMD FPGAs and PLDs on boards, offering a reliable and standardized method for device initialization.

Key Specifications

Type Programmer (In-Circuit/In-System)
Contents Board(s)
Utilized IC / Part EEPROM, FPGA, PLD

Getting Started

To get started with the AMD HW-USB-II-G, install the AMD Vivado Design Suite or the AMD ISE Design Suite, which include the necessary drivers and programming tools. Connect the programmer to your PC via a standard USB 2.0 port and to your target board's JTAG header. Refer to the specific device documentation for programming procedures and JTAG chain setup.

Also Consider

SAM D21 Xplained Pro MCHPMicrochip Technology - For microcontroller-centric development, an evaluation kit like the SAM D21 Xplained Pro offers integrated debugging and programming capabilities without needing a separate programmer.

Categories

Test & Debug Tools > Programmers
The 2026 Embedded Online Conference