EmbeddedRelated.com
ICE5QR4770AZ

IFXICE5QR4770AZ

MPN: ICE5QR4770AZXKLA1
Infineon Technologies
Converter Offline Flyback Topology PG-DIP-7
5,926 in stock

Overview

The ICE5QR4770AZ is a quasi-resonant flyback controller with an integrated 700V CoolMOS power switch, designed for offline switch mode power supplies up to 27W. It operates in quasi-resonant mode for high efficiency and features Active Burst Mode to achieve low standby power consumption below 100mW. The device includes a comprehensive suite of protection features and a digital soft start to minimize component stress during power-up.

Why Choose This Part

The integration of a 700V MOSFET into a DIP-7 package simplifies PCB layout and reduces the external bill of materials. Quasi-resonant switching reduces EMI and switching losses, while the internal 16V start-up cell and Active Burst Mode enable very low standby current of 320uA.

Applications

Auxiliary Power Supplies
Ideal for providing standby and logic power in large appliances like air conditioners and refrigerators.
Adapter and Chargers
Used in AC/DC adapters where high efficiency and low standby power are required for regulatory compliance.
Set-Top Boxes
Provides a compact, isolated power solution for consumer electronics requiring multiple output rails via a flyback transformer.
Industrial SMPS
Suitable for low-power industrial control boards requiring isolated 12V or 24V DC rails from a universal AC input.

Key Specifications

Topology Flyback
Mounting Type Through Hole
Power (Watts) 27 W
Package / Case 8-DIP (0.300", 7.62mm), 7 Leads
Fault Protection Current Limiting, Open Loop, Over Load, Over Temperature, Over Voltage
Output Isolation Isolated
Internal Switch(s) Yes
Voltage - Start Up 16 V
Voltage - Breakdown 700V
Operating Temperature -40degC ~ 125degC (TJ)
Supplier Device Package PG-DIP-7
Voltage - Supply (Vcc/Vdd) 10V ~ 27V

Getting Started

Designers should begin by calculating the transformer primary inductance based on the 27W power limit and minimum AC input voltage. Use the Infineon Power Multitool or Excel-based design tools to determine the RCD snubber values and compensation network for the feedback loop. Ensure the PG-DIP-7 package is properly heat-sinked through the PCB copper planes as the operating junction temperature is rated up to 125 degrees Celsius.