TIINA301A1IDGKR
Overview
The INA301A1IDGKR is a high-side or low-side current-shunt monitor that combines a precision voltage-output amplifier with an integrated high-speed comparator. It provides a real-time analog output for current monitoring alongside a fast-acting alert signal with a response time as low as 1 microsecond. This device is designed for overcurrent protection and feedback control in systems operating with common-mode voltages up to 36V.
Why Choose This Part
The INA301A1IDGKR offers a high bandwidth of 550kHz and a slew rate of 4V/us, making it suitable for dynamic current measurements. Its zero-drift architecture ensures 0.1 percent accuracy across the full -40C to 125C temperature range. The integrated open-drain comparator supports latching mode, reducing the need for external high-speed logic to catch transient fault conditions.
Applications
Key Specifications
Getting Started
To evaluate this part, use the INA301EVM evaluation module which provides test points for the analog output and alert pins. Connect a shunt resistor sized for your target current range, ensuring the differential voltage stays within the linear range of the A1 gain variant. Configure the alert threshold using a single external resistor on the LIMIT pin and select between transparent or latching mode using the RESET pin.
