EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 20hrs 20min 55sec
Learn More →
ISO1541DR

TIISO1541DR

Texas Instruments
I2C Digital Isolator 2500Vrms 2 Channel 1Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Active5,371 in stock

Overview

The ISO1541DR is a low-power, bidirectional I2C isolator that provides 2500Vrms digital isolation for data clocks and lines. It utilizes capacitive coupling technology to enable high-speed 1Mbps communication while maintaining 50kV/us typical common-mode transient immunity. The device is designed to prevent ground-loop interference and provide high-voltage protection in complex system architectures.

Why Choose This Part

The ISO1541DR offers a high CMTI of 50kV/us, ensuring reliable data integrity in electrically noisy environments. It features a wide supply range of 3V to 5.5V and specialized open-drain outputs with 35mA sink capability on Side 2 to drive heavily loaded buses.

Applications

Isolated I2C Interfaces
Used to isolate I2C buses between different voltage domains or to protect sensitive controllers from high-voltage transients in industrial systems.
Battery Management Systems (BMS)
Provides isolation for monitoring circuitry in high-voltage battery stacks where communication signals must traverse significant potential differences.
Motor Control Feedback
Isolates the digital feedback path from power inverter stages to prevent switching noise from corrupting the controller logic.
Power over Ethernet (PoE)
Facilitates isolated communication between the power sourcing equipment and the internal system management controller.

Key Specifications

Type I2C
Data Rate 1Mbps
Technology Capacitive Coupling
Channel Type Bidirectional, Unidirectional
Mounting Type Surface Mount
Isolated Power No
Package / Case 8-SOIC (0.154", 3.90mm Width)
Voltage - Supply 3V ~ 5.5V
Number of Channels 2
Voltage - Isolation 2500Vrms
Operating Temperature -40degC ~ 125degC
Inputs - Side 1/Side 2 2/1
Supplier Device Package 8-SOIC
Pulse Width Distortion (Max) 80ns, 21ns
Common Mode Transient Immunity (Min) 25kV/us

Getting Started

To implement the ISO1541DR, ensure Side 1 is connected to the master controller and Side 2 is connected to the slave devices or extended bus. Proper decoupling capacitors (0.1uF) should be placed as close as possible to the VCC pins on both sides of the isolation barrier. Evaluation can be performed using the ISO1541EVM evaluation module.

ISO1541 Family

Part NumberDifferenceStock
ISO1541QDRQ1 QDRQ1 3,183

Also Consider

ISO1540DR TITexas Instruments - Provides two bidirectional channels instead of one bidirectional and one unidirectional channel, useful for multi-master I2C setups.
ADuM1250ARZ Analog Devices - Uses iCoupler transformer technology for isolation and supports bidirectional I2C up to 1MHz.