EmbeddedRelated.com
IWR6843ABGABL

TIIWR6843ABGABL

Texas Instruments
IC RF TxRx + MCU 60GHz ~ 64GHz 161-TFBGA, FCCSP
Active

Overview

The IWR6843ABGABL is an integrated single-chip mmWave sensor based on FMCW radar technology operating in the 60GHz to 64GHz band. It combines a high-performance RF front-end with an Arm Cortex-R4F MCU and a C674x DSP to enable on-chip beamforming and advanced signal processing for industrial automation.

Why Choose This Part

This SoC features a dedicated C674x DSP and a hardware accelerator for FFT and CFAR processing, significantly reducing the computational load on the main ARM core. It supports functional safety requirements through built-in self-test (BIST) and monitoring of the RF front-end and digital subsystems.

Applications

Industrial Robotics
Utilizes 60GHz radar for area monitoring, collision avoidance, and safety guarding in automated factory environments.
Building Automation
High-resolution occupancy detection, people counting, and motion tracking for HVAC and lighting control systems.
Level Sensing
Precise non-contact measurement of liquid or solid levels in tanks and silos using high-frequency radar chirps.
Functional Safety Systems
Integrated into SIL-rated environments for presence detection where high reliability and self-testing are required.

Key Specifications

GPIO 48
Type TxRx + MCU
Frequency 60GHz ~ 64GHz
Mounting Type Surface Mount
Package / Case 161-TFBGA, FCCSP
Power - Output 12dBm
Data Rate (Max) 900Mbps
Voltage - Supply 1.71V ~ 1.89V, 3.135V ~ 3.465V
Serial Interfaces ADC, GPIO, I2C, SPI
Operating Temperature -40degC ~ 105degC (TJ)
Supplier Device Package 161-FC/CSP (10.4x10.4)

Getting Started

Development is supported through the TI mmWave SDK and the Code Composer Studio IDE. Hardware evaluation is typically performed using the IWR6843ISK or IWR6843AOPEVM evaluation modules combined with the MMWAVEICBOOST carrier board.

IWR6843A Family

Part NumberDifferenceStock
IWR6843AOPEVM OPEVM 142