EmbeddedRelated.com
LARA-R6001-00B

u-bloxLARA-R6001-00B

u-blox
Cellular GSM, LTE, WCDMA Transceiver Module 700MHz, 800MHz, 850MHz, 900MHz, 1.7GHz, 1.8GHz, 1.9GHz, 2.1GHz, 2.3GHz, 2.6GHz Antenna Not Included Surface Mount
Active

Overview

The LARA-R6001-00B is a multi-mode LTE Cat 1 module designed for global connectivity, supporting a wide range of frequencies from 700MHz to 2.6GHz. It provides reliable fallback to 3G WCDMA and 2G GSM networks, ensuring communication in areas with limited 4G coverage. Operating on a 2.8V to 4.5V supply, this surface-mount module delivers data rates up to 10.3Mbps for IoT applications requiring moderate throughput.

Why Choose This Part

The module offers a versatile global footprint by integrating LTE Cat 1 with comprehensive 3G and 2G fallback capabilities. Its high receiver sensitivity of -110dBm and robust 33dBm output power ensure stable links in challenging RF environments. The compact 100-SMD module package allows for standardized hardware designs across different regional variants in the LARA-R6 family.

Applications

Asset Tracking
Global logistics monitoring where seamless switching between LTE, 3G, and 2G is required across different regional networks.
Industrial Gateways
Providing primary or failover cellular connectivity for remote telemetry units and industrial control systems.
Smart Metering
Utility meters requiring long-lifecycle modules with high sensitivity of -110dBm for reliable operation in indoor or shielded environments.
Telematics
Vehicle tracking and diagnostic systems that benefit from the module's 33dBm output power and multi-band support.

Key Specifications

Protocol GSM, LTE, WCDMA
Data Rate 10.3Mbps
Frequency 700MHz, 800MHz, 850MHz, 900MHz, 1.7GHz, 1.8GHz, 1.9GHz, 2.1GHz, 2.3GHz, 2.6GHz
Modulation GMSK, QPSK, PSK
Sensitivity -110dBm
Antenna Type Antenna Not Included
Mounting Type Surface Mount
Package / Case 100-SMD Module
Power - Output 33dBm
Voltage - Supply 2.8V ~ 4.5V
Serial Interfaces GPIO, I2C, UART, USB
RF Family/Standard Cellular
Current - Receiving 50mA ~ 630mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 50mA ~ 630mA

Getting Started

Development typically begins with the EVK-R6 evaluation kit, which provides access to the module's interfaces via USB and header pins. Engineers can configure the module using standard AT commands for network registration and data transfer. Ensure the PCB design accounts for the 2.8V to 4.5V supply requirements and includes a high-quality external antenna tuned for the target frequency bands.

Also Consider

EG25-G Quectel - Offers global LTE Cat 4 coverage with higher data rates if 10.3Mbps is insufficient for the application.