EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 13hrs 33min 13sec
Learn More →
LM2902DR2G

ONLM2902DR2G

onsemi
Standard (General Purpose) Amplifier 4 Circuit 14-SOIC
Active14,655 in stock

Overview

The LM2902DR2G is a quad-channel, general-purpose operational amplifier designed for operation over a wide range of voltages from 3V to 32V. This device features four independent, internally frequency-compensated amplifiers in a single 14-SOIC package, specifically characterized for an extended temperature range of -40C to 105C. It is a cost-effective solution for applications requiring multiple op-amps with low power consumption and common-mode input ranges that include ground.

Why Choose This Part

This amplifier offers excellent versatility with a wide power supply range and low quiescent current of 1.2mA at 5V. Its integrated ESD clamps and short-circuit protected outputs enhance system ruggedness, while the 1MHz gain bandwidth product is sufficient for most standard analog signal processing tasks.

Applications

Transducer Amplifiers
Used to interface with various sensors where multiple amplification stages or signal conditioning channels are required.
DC Gain Blocks
Provides reliable DC amplification in industrial control systems thanks to its wide supply voltage range.
Active Filters
Suitable for implementing low-frequency active filters in signal processing chains.
Current Sensing
Utilized in low-side current sensing applications where the input common-mode range must extend to the negative rail.

Key Specifications

Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 14-SOIC (0.154", 3.90mm Width)
Number of Circuits 4
Current - Input Bias 90 nA
Operating Temperature -40degC ~ 105degC
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 2 mV
Supplier Device Package 14-SOIC
Current - Output / Channel 40 mA
Voltage - Supply Span (Max) 32 V
Voltage - Supply Span (Min) 3 V

Getting Started

To evaluate this part, use a standard SOIC-14 breakout board for breadboarding or prototype PCBs. Ensure decoupling capacitors are placed close to the VCC pin and note that the device is internally compensated, requiring no external frequency compensation components for stability.

LM2902 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Current - Input Bias Temp Range Gain Bandwidth Product Voltage - Input Offset Current - Output / Channel Stock
LM2902DR2G (this part) SOIC-14 90 nA -40degC ~ 105degC 1 M 2 mV 40 mA 14,655
LM2902KDR (Texas Instruments) SOIC-14 20 nA -40degC ~ 125degC .. 700 k 3 mV 30 mA 13,322
LM2902N/NOPB (Texas Instruments) DIP-14 45 nA -40degC ~ 85degC (.. 1 M 2 mV 40 mA 10,689
LM2902KVQDRQ1 (Texas Instruments) SOIC-14 20 nA -40degC ~ 125degC 1.2 M 3 mV 60 mA 10,259

Also Consider

LM2904DR2G ONonsemi - The dual-channel version of this amplifier for applications requiring fewer circuits and a smaller footprint.
TLV9004IDR TITexas Instruments - A modern rail-to-rail input/output alternative with a higher 1.1MHz bandwidth and lower noise floor.