EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
24days 14hrs 47min 25sec
Learn More →
LTP5902IPC-IPMA#PBF

ADILTP5902IPC-IPMA#PBF

Analog Devices Inc.
802.15.4 Smartmesh IP™, 6LoWPAN Transceiver Module 2.4GHz Antenna Not Included, MMCX Surface Mount
Active257 in stock

Overview

The LTP5902IPC-IPMA#PBF is a SmartMesh IP wireless transceiver module based on the Dust Networks 802.15.4 technology. It provides a complete 2.4GHz radio solution with a pre-certified 6LoWPAN stack designed for ultra-low power, industrial-grade mesh networking. The module includes an MMCX connector for external antenna flexibility and integrates a 512kB Flash and 72kB SRAM for robust local processing.

Why Choose This Part

It delivers over 99.999 percent data reliability in harsh RF environments by using Time Slotted Channel Hopping (TSCH) technology. The integrated 6LoWPAN stack allows every node to be individually addressable via IPv6, simplifying cloud integration while maintaining a sensitivity of -95dBm for long-range performance.

Applications

Industrial Wireless Sensor Networks
High-reliability monitoring of factory equipment where wired infrastructure is cost-prohibitive.
Remote Asset Management
Tracking and diagnostics for distributed infrastructure such as oil and gas pipelines or utility grids.
Smart Building Automation
Energy-efficient control of HVAC and lighting systems using a self-healing mesh topology.
Environmental Monitoring
Long-term outdoor deployments for air quality or agricultural sensing requiring multi-year battery life.

Key Specifications

Protocol Smartmesh IP, 6LoWPAN
Data Rate 250kbps
Frequency 2.4GHz
Modulation DSSS
Memory Size 512kB Flash, 72kB SRAM
Sensitivity -95dBm
Antenna Type Antenna Not Included, MMCX
Mounting Type Surface Mount
Package / Case 66-SMD Module
Power - Output 8dBm
Voltage - Supply 2.1V ~ 3.76V
Serial Interfaces SPI, UART
RF Family/Standard 802.15.4
Current - Receiving 4.5mA
Operating Temperature -40degC ~ 85degC
Current - Transmitting 5.4mA ~ 9.7mA

Getting Started

Developers should use the DC9000B SmartMesh IP Starter Kit for network evaluation and the DustCloud developer resources for software integration. Communication with the module is handled via UART or SPI using the SmartMesh IP API commands to manage joining, configuration, and data transmission.

Also Consider

MGM240P Mighty Gecko Module SiLSilicon Labs - A versatile multi-protocol module supporting Matter, OpenThread, and Zigbee if standard 802.15.4 mesh protocols other than SmartMesh are required.