EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 14hrs 01min 35sec
Learn More →
LTV-816S-TA1

LTV-816S-TA1

Lite-On Inc.
Optoisolator Transistor Output 5000Vrms 1 Channel 4-SMD
Active102,037 in stock

Overview

The LTV-816S-TA1 is a single-channel phototransistor optoisolator designed for signal isolation between high-voltage and low-voltage circuits. It provides a high isolation voltage of 5000Vrms and features a transistor output capable of handling up to 80V. This surface-mount component is ideal for digital logic isolation and power supply feedback loops.

Why Choose This Part

The LTV-816S-TA1 offers a wide Current Transfer Ratio (CTR) range of 50% to 600% at 5mA, allowing for flexible design across various load conditions. Its 80V output rating provides more headroom than standard 30V or 35V optocouplers, and its compact 4-pin SMD package saves significant board space in dense designs.

Applications

Switching Power Supplies
Used in feedback loops to provide electrical isolation between the primary and secondary sides of a DC-DC converter or AC-DC adapter.
Programmable Logic Controllers (PLCs)
Protects sensitive MCU inputs from high-voltage transients on industrial digital input lines.
System Appliances
Provides safety isolation in consumer electronics like chargers and printers where 5000Vrms isolation is required for regulatory compliance.
Signal Transmission
Facilitates noise-free communication between two circuits operating at different ground potentials.

Key Specifications

Input Type DC
Output Type Transistor
Mounting Type Surface Mount
Package / Case 4-SMD, Gull Wing
Number of Channels 1
Voltage - Isolation 5000Vrms
Vce Saturation (Max) 200mV
Operating Temperature -50degC ~ 110degC
Rise / Fall Time (Typ) 4us, 3us
Voltage - Output (Max) 80V
Supplier Device Package 4-SMD
Current - Output / Channel 50mA
Current Transfer Ratio (Max) 600% @ 5mA
Current Transfer Ratio (Min) 50% @ 5mA
Voltage - Forward (Vf) (Typ) 1.2V
Current - DC Forward (If) (Max) 50 mA

Getting Started

To implement this part, calculate the input series resistor using the 1.2V typical forward voltage (Vf) and your target drive current (typically 5mA). Ensure the PCB layout maintains the creepage and clearance distances required to support the 5000Vrms isolation rating. Performance can be verified by measuring the rise and fall times, typically 4us and 3us respectively, under your specific load resistance.