EmbeddedRelated.com
M2GL010-FGG484I

MCHPM2GL010-FGG484I

Microchip Technology
IGLOO2 Field Programmable Gate Array (FPGA) IC 233 933888 12084 484-BGA
Active207 in stock

Overview

The M2GL010-FGG484I is a member of the IGLOO2 FPGA family from Microchip, featuring 12,084 logic elements and a low-power flash-based architecture. This industrial-grade device is designed for security and reliability, offering integrated math blocks, PCIe Gen 1/2 support, and a high-performance SerDes interface. It operates with a core voltage range of 1.14V to 1.26V and includes on-chip flash memory and DDR3 controllers with error correction.

Why Choose This Part

The IGLOO2 architecture provides superior power efficiency with a sleep current as low as 11uA and immunity to SEU (Single Event Upset) configuration upsets due to its flash-based fabric. It integrates significant peripheral resources including a 32 KB SRAM, hard DDR3 memory controllers, and a built-in oscillator, reducing external component count.

Applications

Industrial Protocol Conversion
Utilizing integrated PCIe and SerDes interfaces to bridge high-speed industrial communication standards.
Secure Edge Processing
Leveraging the inherent security of flash-based FPGA fabric for sensitive data processing in edge computing.
Motor Control and DSP
Using integrated math blocks and 12k logic cells to implement complex control loops and signal filtering.
Power-Constrained Systems
Implementing designs in battery-operated or thermally constrained environments using the Flash*Freeze low-power mode.

Key Specifications

Mounting Type Surface Mount
Number of I/O 233
Package / Case 484-BGA
Total RAM Bits 933888
Voltage - Supply 1.14V ~ 2.625V
Operating Temperature -40degC ~ 100degC (TJ)
Supplier Device Package 484-FPBGA (23x23)
Number of Logic Elements/Cells 12084

Getting Started

Development is supported by Microchip's Libero SoC Design Suite for synthesis, layout, and timing analysis. Hardware evaluation can be performed using the IGLOO2 Evaluation Kit, and programming is typically achieved via the JTAG or SWD interfaces using a FlashPro programmer.