EmbeddedRelated.com
    Parts    MASW-007107-TR3000
MASW-007107-TR3000

MASW-007107-TR3000

MACOM Technology Solutions
RF Switch IC WLAN SPDT 8 GHz 50Ohm 8-PDFN (2x2)
Active82,227 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MASW-007107-TR3000 is a GaAs pHEMT MMIC SPDT (single pole, double throw) reflective switch designed for high-performance WLAN and MIMO applications. It operates across a wide frequency range from 0 Hz to 8 GHz, offering exceptionally low insertion loss and high isolation in a compact 2x2 mm PDFN package. The device is optimized for 802.11a/b/g systems that require fast settling times and low gate lag.

Why Choose This Part

This switch provides a low insertion loss of 0.5 dB and high isolation of 30 dB in the critical 2-6 GHz band, ensuring high signal integrity for WiFi 6 and legacy standards. It supports both positive and negative control logic for flexible system integration and features full passivation for enhanced reliability. Its small 2x2 mm footprint is ideal for space-constrained mobile and embedded wireless designs.

Applications

802.11a/b/g WLAN Systems
Used as a transmit/receive or antenna diversity switch in WiFi networking equipment.
MIMO Architectures
Integrates into Multiple-Input Multiple-Output antenna arrays to manage signal paths in high-bandwidth wireless routers.
General Purpose RF Switching
Provides broadband switching for test equipment and instrumentation up to 8 GHz.

Key Specifications

P1dB 27dBm
Circuit SPDT
RF Type WLAN
Topology Reflective
Impedance 50Ohm
Isolation 20dB
Insertion Loss 0.75dB
Package / Case 8-VFDFN Exposed Pad
Test Frequency 8GHz
Frequency Range 0Hz ~ 8GHz
Operating Temperature -40degC ~ 85degC
Supplier Device Package 8-PDFN (2x2)

Getting Started

Designers can evaluate performance using the MASW-007107-000SMB sample test board. When laying out the PCB, ensure proper grounding of the 8-lead PDFN exposed pad and use 50-ohm microstrip or stripline traces for all RF ports to maintain impedance matching. Control voltages should be kept within the 0V to 8V range for reliable switching operation.