EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
24days 14hrs 37min 45sec
Learn More →
MAX9928FABT+T

ADIMAX9928FABT+T

Analog Devices Inc./Maxim Integrated
Current Sense Amplifier 1 Circuit 6-UCSP
Active300 in stock

Overview

The MAX9928FABT+T is a high-side current-sense amplifier designed for monitoring current in compact systems. It features a wide input common-mode range and operates with an ultra-low supply current of 20uA, making it ideal for battery-powered applications. The device translates a small differential voltage across a sense resistor into a proportional output current.

Why Choose This Part

The component offers an extremely low 20uA supply current and a 600uV input offset voltage to maintain measurement accuracy while minimizing power overhead. Its 6-UCSP package provides a significant footprint reduction for space-constrained designs without sacrificing wide operating temperature performance from -40degC to 125degC.

Applications

Battery Charge and Discharge Monitoring
Used in mobile devices to track current flow into and out of Li-ion batteries.
Power Management Systems
Provides real-time current feedback for power distribution and efficiency monitoring in portable electronics.
Overcurrent Protection
Acts as a precision sensor for fast-acting protection circuits in low-voltage power rails.

Key Specifications

Mounting Type Surface Mount
-3db Bandwidth 150 kHz
Amplifier Type Current Sense
Package / Case 6-WFBGA, CSPBGA
Current - Supply 20uA
Number of Circuits 1
Current - Input Bias 1.6 uA
Operating Temperature -40degC ~ 125degC
Voltage - Input Offset 600 uV
Supplier Device Package 6-UCSP
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 2.5 V

Getting Started

To evaluate this part, use the MAX9928EVKIT evaluation kit which provides a pre-assembled PCB for testing the bidirectional current sensing capabilities. Ensure the shunt resistor is placed close to the IC to minimize parasitic inductance and noise on the 150 kHz bandwidth signal.

Also Consider

INA180 TITexas Instruments - A cost-effective alternative in a standard SOT-23 package if the ultra-small UCSP footprint is not required.