EmbeddedRelated.com
MCIMX6Y2CVM08AB

MCIMX6Y2CVM08AB

NXP USA Inc.
ARM® Cortex®-A7 Microprocessor IC i.MX6 1 Core, 32-Bit 792MHz 289-MAPBGA (14x14)
Active4,989 in stock

Overview

The MCIMX6Y2CVM08AB is an i.MX 6ULL single-core processor based on the Arm Cortex-A7 architecture, operating at speeds up to 792MHz. This microprocessor is designed for low-power industrial and IoT applications, featuring dual 10/100 Ethernet ports and a comprehensive security suite including High Assurance Boot (HAB) and TrustZone support.

Why Choose This Part

The i.MX 6ULL offers an excellent balance of power efficiency and connectivity with dual USB 2.0 OTG PHYs and dual CAN interfaces. It simplifies system design by supporting 1.8V, 2.8V, and 3.3V I/O voltages while maintaining extremely low standby power consumption as low as 0.03 microamps.

Applications

Industrial Gateways
Utilizing dual Ethernet and 8 UARTs to bridge legacy industrial equipment with modern IP networks.
IoT Edge Controllers
Implementing secure boot and hardware-based crypto for smart building and energy management systems.
HMI Terminals
Driving basic graphical user interfaces for industrial control panels with LPDDR2 or DDR3 memory support.
Secure Telematics
Leveraging Arm TrustZone and SNVS for protected data processing in commercial vehicle tracking.

Key Specifications

USB USB 2.0 OTG + PHY (2)
Speed 792MHz
Ethernet 10/100Mbps (2)
Mounting Type Surface Mount
Voltage - I/O 1.8V, 2.8V, 3.3V
Core Processor ARM Cortex-A7
Package / Case 289-LFBGA
RAM Controllers LPDDR2, DDR3, DDR3L
Co-Processors/DSP Multimedia; NEON MPE
Security Features A-HAB, ARM TZ, CSU, SJC, SNVS
Additional Interfaces CANbus, I2C, SPI, UART
Graphics Acceleration No
Operating Temperature -40degC ~ 105degC (TJ)
Supplier Device Package 289-MAPBGA (14x14)
Number of Cores/Bus Width 1 Core, 32-Bit
Display & Interface Controllers Electrophoretic, LCD

Getting Started

Engineers typically begin development using the i.MX 6ULL EVK (Evaluation Kit) and the Yocto Project for building custom Linux distributions. The device is supported by NXP MCUXpresso SDK for bare-metal or RTOS applications, and hardware designs can follow the 0.8mm pitch 289-MAPBGA layout guidelines.

Also Consider

SAMA5D27C-D1G-CU MCHPMicrochip Technology - An alternative Cortex-A5 processor that features integrated 1Gb DDR2 memory to simplify PCB routing.
STM32MP157CAC3 STMicroelectronics - Provides dual-core Cortex-A7 performance plus an integrated Cortex-M4 for real-time task offloading.