MCHPMCP2562FD-E/SN
Overview
The MCP2562FD-E/SN is a high-speed CAN Flexible Data Rate (CAN FD) transceiver designed to interface a CAN protocol controller with the physical two-wire bus. It supports data rates up to 8Mbps and features a dedicated VIO pin, allowing for direct connection to microcontrollers operating with I/O voltages from 1.8V to 5.5V without level shifters.
Why Choose This Part
This transceiver offers integrated protection including permanent dominant detection on both TXD and the bus, plus thermal shutdown. Its wide VIO supply range (1.8V to 5.5V) simplifies design in mixed-voltage systems, and it features high ESD protection of +/-8 kV (IEC 61000-4-2) on the bus pins.
Applications
Key Specifications
Getting Started
When designing your PCB, place a 0.1uF bypass capacitor as close as possible to the VDD and VIO pins. For evaluation, use this IC with a CAN FD-capable controller like the MCP2517FD or an MCU with an integrated CAN FD peripheral, ensuring the bus is terminated with 120-ohm resistors at both ends.
MCP2562 Family
Comparing specs that differ across variants. The current part is highlighted.
| Part Number | Package | Temp Range | Stock |
|---|---|---|---|
| MCP2562FD-E/SN (this part) | SOIC-8 | -40degC ~ 125degC | 9,623 |
| MCP2562T-E/SN | SOIC-8 | -40degC ~ 125degC | 1,195 |
| MCP2562-E/SN | SOIC-8 | -40degC ~ 125degC | 499 |
| MCP2562 | SOIC-8 | -40degC ~ 125degC | 3,631 |
| MCP2562T-H/MF | VDFN-8 | -40degC ~ 150degC | 3,631 |
Also Consider
NXP Semiconductors
- An AEC-Q100 qualified transceiver optimized for high-speed CAN FD applications with very low standby current.
