MCHPMCP2562FDT-E/MF
Overview
The MCP2562FDT-E/MF is a high-speed CAN transceiver that provides the interface between a CAN protocol controller and the physical two-wire CAN bus. This device is capable of data rates up to 8Mbps and features an integrated Vio pin for direct interfacing with microcontrollers operating from 1.8V to 5.5V.
Why Choose This Part
The inclusion of a Vio pin eliminates the need for external level shifters when connecting to low-voltage MCUs. It offers high electromagnetic immunity and low electromagnetic emission while providing 200 mV of receiver hysteresis to ensure robust signal reception.
Applications
Key Specifications
Getting Started
To evaluate this part, use the MCP2562FD Click board or a custom PCB following the recommended 8-DFN (3x3) footprint. Ensure a 120-ohm termination resistor is present at the ends of the CAN bus and place decoupling capacitors close to the VDD and Vio pins.
MCP2562 Family
Comparing specs that differ across variants. The current part is highlighted.
| Part Number | Data Rate | Package | Voltage | Temp Range | Stock |
|---|---|---|---|---|---|
| MCP2562FDT-E/MF (this part) | 8M | VDFN-8 | 4.5V | -40degC ~ 125degC | 1,256 |
| MCP2562T-E/MF | — | VDFN-8 | 4.5V | -40degC ~ 125degC | 25,584 |
| MCP2562-E/SN | — | SOIC-8 | 4.5V | -40degC ~ 125degC | 6,155 |
| MCP2562FDT-H/SN | 8M | SOIC-8 | 4.5V | -40degC ~ 150degC | 6,378 |
| MCP2562-E/MF | — | VDFN-8 | 4.5V | -40degC ~ 125degC | 69,436 |
| MCP2562-E/P | — | DIP-8 | 4.5V | -40degC ~ 125degC | 413 |
| MCP25625-E/ML | — | VQFN-28 | 2.7V | -40degC ~ 125degC | 28,011 |
| MCP25625T-E/SS | 1M | SSOP-28 | 4.5V | -40degC ~ 125degC | 1,349 |
| MCP2562 | — | SOIC-8 | 4.5V | -40degC ~ 125degC | 3,631 |
| MCP2562FD-E/P | 8M | DIP-8 | 4.5V | -40degC ~ 125degC | 493 |
| MCP2562FD-E/MF | 8M | VDFN-8 | 4.5V | -40degC ~ 125degC | 80 |
Also Consider
NXP Semiconductors
- Provides high-speed CAN FD support and is optimized for low power consumption in standby modes.
