MCHPMCP2562FDT-E/SN
Overview
The MCP2562FDT-E/SN is a high-speed CAN transceiver that provides an interface between a CAN protocol controller and the physical two-wire CAN bus. It is capable of supporting CAN Flexible Data-rate (CAN FD) requirements at speeds up to 8Mbps and features a Vio pin for direct interfacing with microcontrollers operating from 1.8V to 5.5V.
Why Choose This Part
The device offers very low standby current of 5uA and high-speed operation up to 8Mbps for CAN FD applications. Its integrated Vio pin eliminates the need for external level shifters when connecting to low-voltage MCUs, while the 200mV receiver hysteresis provides excellent noise immunity.
Applications
Key Specifications
Getting Started
To evaluate this transceiver, use the Microchip CAN FD Splice Board or integrate it with a PIC32 or dsPIC33 development board. Ensure a 120-ohm termination resistor is present at both ends of the CAN bus and place a decoupling capacitor close to the Vdd and Vio pins.
MCP2562 Family
Comparing specs that differ across variants. The current part is highlighted.
| Part Number | Package | Voltage | Temp Range | Stock |
|---|---|---|---|---|
| MCP2562FDT-E/SN (this part) | SOIC-8 | 4.5V | -40degC ~ 125degC | 48,181 |
| MCP2562T-E/SN | SOIC-8 | 4.5V | -40degC ~ 125degC | 1,195 |
| MCP2562-E/SN | SOIC-8 | 4.5V | -40degC ~ 125degC | 499 |
| MCP25625-E/ML | VQFN-28 | 2.7V | -40degC ~ 125degC | 28,011 |
| MCP2562FD-E/SN | SOIC-8 | 4.5V | -40degC ~ 125degC | 9,623 |
| MCP2562 | SOIC-8 | 4.5V | -40degC ~ 125degC | 3,631 |
| MCP2562T-H/MF | VDFN-8 | 4.5V | -40degC ~ 150degC | 3,631 |
Also Consider
NXP Semiconductors
