EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Nov 1 · 5 live sessions, Dec 7-11
Discount ends in
15days 01hrs 10min 49sec
Learn More →
    Parts    Microchip CAN Transceivers Family    MCP2562    MCP2562T-E/MF
MCP2562T-E/MF

MCHPMCP2562T-E/MF

Microchip Technology
1/1 Transceiver Half CANbus 8-DFN (3x3)
Active25,584 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP2562T-E/MF is a high-speed CAN transceiver that serves as the physical layer interface between a CAN protocol controller and the physical two-wire bus. This AEC-Q100 qualified device supports data rates up to 1 Mb/s and features a dedicated VIO pin for direct interfacing with microcontrollers operating from 1.8V to 5.5V.

Why Choose This Part

The inclusion of a VIO supply pin eliminates the need for external level shifters when connecting the transceiver to low-voltage microcontrollers. It offers excellent robust performance with high-voltage transient protection and a low standby current of only 5 uA typical, making it suitable for power-sensitive automotive applications.

Applications

Automotive Electronic Control Units (ECUs)
Used in 12V and 24V vehicle systems for robust communication between powertrain, chassis, and body controllers.
Industrial Automation
Ideal for CANopen and DeviceNet networks in factory environments where high-noise immunity and ground fault detection are required.
Power Distribution Systems
Facilitates communication within smart power grids and battery management systems that utilize CAN-based monitoring.

Key Specifications

Type Transceiver
Duplex Half
Protocol CANbus
Mounting Type Surface Mount
Package / Case 8-VDFN Exposed Pad
Voltage - Supply 4.5V ~ 5.5V
Receiver Hysteresis 200 mV
Operating Temperature -40degC ~ 125degC
Supplier Device Package 8-DFN (3x3)
Number of Drivers/Receivers 1/1

Getting Started

To evaluate this transceiver, use the MCP2562 Click board or integrate it into a design using a 3x3mm DFN footprint. Ensure the VDD pin is supplied with 4.5V to 5.5V and the VIO pin matches your microcontroller logic level (1.8V to 5.5V) for proper signal translation.

Part of Microchip CAN Transceivers family » MCP2562

MCP2562 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Voltage Temp Range Data Rate Stock
MCP2562T-E/MF (this part) VDFN-8 4.5V -40degC ~ 125degC — 25,584
MCP2562FDT-E/MF VDFN-8 4.5V -40degC ~ 125degC 8M 1,256
MCP2562-E/SN SOIC-8 4.5V -40degC ~ 125degC — 6,155
MCP2562FDT-H/SN SOIC-8 4.5V -40degC ~ 150degC 8M 6,378
MCP2562-E/MF VDFN-8 4.5V -40degC ~ 125degC — 69,436
MCP2562-E/P DIP-8 4.5V -40degC ~ 125degC — 413
MCP25625-E/ML VQFN-28 2.7V -40degC ~ 125degC — 28,011
MCP25625T-E/SS SSOP-28 4.5V -40degC ~ 125degC 1M 1,349
MCP2562 SOIC-8 4.5V -40degC ~ 125degC — 3,631
MCP2562FD-E/P DIP-8 4.5V -40degC ~ 125degC 8M 493
MCP2562FD-E/MF VDFN-8 4.5V -40degC ~ 125degC 8M 80
Also available as: MCP2562-I/P, MCP2562-I/SN

Also Consider

MCP2561 MCHPMicrochip Technology - A pin-compatible variant that replaces the VIO pin with a SPLIT pin for common-mode stabilization.
TJA1042T/3 NXP Semiconductors - An industry-standard alternative with high electrostatic discharge (ESD) protection and low electromagnetic emissions.