EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
28days 02hrs 09min 15sec
Learn More →
MCP3021A5T-E/OT

MCHPMCP3021A5T-E/OT

Microchip Technology
10 Bit Analog to Digital Converter 1 Input 1 SAR SOT-23-5
Active11,441 in stock

Overview

The MCP3021A5T-E/OT is a 10-bit Successive Approximation Register (SAR) analog-to-digital converter featuring a simple I2C interface and low power consumption. This single-channel ADC operates over a voltage range of 2.7V to 5.5V and uses the supply voltage as its reference, simplifying design by eliminating external components. Its small SOT-23-5 package and 5uA typical quiescent current make it ideal for space-constrained, battery-powered applications.

Why Choose This Part

The device features an on-chip sample and hold circuit and a self-timed conversion clock, ensuring consistent performance without complex MCU timing requirements. It is designed for low-power operation, drawing only 0.250mA maximum during active conversion and dropping to 1uA in standby. Its I2C compatibility allows for easy integration into existing digital systems using only two wires.

Applications

Battery Monitoring
Providing accurate voltage measurements for cell health and capacity estimation in handheld devices.
Isolated Data Acquisition
Using the I2C interface to easily pass digital signals across an optical or digital isolator barrier.
Remote Sensing
Acting as a localized digitizer for analog sensors to reduce noise susceptibility over long cable runs.
Multi-Zone Thermal Monitoring
Deploying multiple converters on a single I2C bus to monitor various temperature points across a PCB.

Key Specifications

Input Type Single Ended
Architecture SAR
Configuration S/H-ADC
Mounting Type Surface Mount
Data Interface I2C
Number of Bits 10
Package / Case SC-74A, SOT-753
Reference Type Supply
Ratio - S/H:ADC 1:1
Number of Inputs 1
Operating Temperature -40degC ~ 125degC
Supplier Device Package SOT-23-5
Number of A/D Converters 1
Voltage - Supply, Analog 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V
Sampling Rate (Per Second) 22.3k

Getting Started

To evaluate this ADC, connect the SDA and SCL pins to your microcontroller's I2C bus with appropriate pull-up resistors. Ensure the VDD pin is decoupled with a 0.1uF capacitor, as the power supply serves as the voltage reference for conversions. Microchip provides the MCP3021 PICtail Demo Board for rapid prototyping and firmware development.

Also Consider

ADS1015 TITexas Instruments - Offers 12-bit resolution and four input channels with an integrated programmable gain amplifier.
MCP3221 MCHPMicrochip Technology - Provides a pin-compatible upgrade to 12-bit resolution for higher precision requirements.