EmbeddedRelated.com
    Parts    Microchip MCP6xxx Op-Amps Family    MCP6001T    MCP6001T-E/OT
MCP6001T-E/OT

MCHPMCP6001T-E/OT

Microchip Technology
Single-channel version from the same family for designs that only need one amplifier and want slightly lower component count or board area.
Active38,101 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6001T-E/OT is a single-channel, general-purpose operational amplifier designed for low-power, rail-to-rail input and output operation. It operates with a supply voltage as low as 1.8V and a typical quiescent current of only 100uA, making it suitable for battery-powered applications. With a 1 MHz Gain Bandwidth Product, it provides a balance of speed and power efficiency in a compact 5-pin SOT-23 package.

Why Choose This Part

The MCP6001 offers a wide 1.8V to 6V operating range while maintaining a very low 100uA supply current. Its rail-to-rail input and output capability maximizes dynamic range, which is critical for low-voltage ADC interfacing. Additionally, the 1 pA input bias current minimizes errors when used with high-impedance signal sources.

Applications

Battery-Powered Instrumentation
Ideal for portable devices requiring low current consumption and the ability to swing the output to both supply rails.
Photodiode Amplifier
Utilizes the extremely low 1 pA input bias current to convert small sensor currents into measurable voltages.
Signal Conditioning
Acts as a buffer or gain stage for sensors in systems with single-supply rails ranging from 1.8V to 6V.
Active Filters
Supports the implementation of low-frequency analog filters in space-constrained industrial and consumer designs.

Key Specifications

Slew Rate 0.6V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case SC-74A, SOT-753
Current - Supply 100uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 4.5 mV
Supplier Device Package SOT-23-5
Current - Output / Channel 23 mA
Voltage - Supply Span (Max) 6 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

When prototyping, ensure bypass capacitors (typically 0.1uF) are placed close to the VDD pin to minimize noise. Since this is a surface-mount SOT-23 device, use an SOT-23 to DIP adapter for breadboarding. Evaluation can be performed using the Microchip MCP6XXX Amplifier Evaluation Board (ADM00288) to test various circuit configurations.

Part of Microchip MCP6xxx Op-Amps family » MCP6001T

MCP6001T Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
MCP6001T-E/OT (this part) SC-74A, SOT-753 -40degC ~ 125degC 38,101
MCP6001T-I/OT SC-74A, SOT-753 -40degC ~ 85degC 164,903
MCP6001T-I/LT TSSOP-5 -40degC ~ 85degC 49,882