EmbeddedRelated.com
    Parts    Microchip MCP6xxx Op-Amps Family    MCP6001T    MCP6001T-I/LT
MCP6001T-I/LT

MCHPMCP6001T-I/LT

Microchip Technology
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SC-70-5
Active49,882 in stock
Datasheet Digi-Key Compare Prices

Overview

The MCP6001T-I/LT is a general-purpose operational amplifier from Microchip Technology designed for low-power, single-supply applications. It features a 1 MHz Gain Bandwidth Product (GBWP) and rail-to-rail input/output swing, making it well-suited for battery-operated systems operating from 1.8V to 6V.

Why Choose This Part

The MCP6001 provides a high phase margin of 90 degrees, ensuring stability even with capacitive loads. Its rail-to-rail output capability allows for maximum signal dynamic range when working with low-voltage ADCs.

Applications

Photodiode Amplifier
The ultra-low input bias current of 1 pA makes it ideal for high-impedance sensor interfaces like photodiode transimpedance amplifiers.
Battery-Powered Instrumentation
With a low quiescent current of 100uA and a minimum operating voltage of 1.8V, it extends battery life in portable equipment.
Active Analog Filters
The 1 MHz bandwidth is sufficient for low-frequency signal conditioning and anti-aliasing filters in microcontroller-based designs.
Notebooks and PDAs
The compact SC-70-5 package and rail-to-rail capability satisfy space-constrained consumer electronics requirements.

Key Specifications

Slew Rate 0.6V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 5-TSSOP, SC-70-5, SOT-353
Current - Supply 100uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 4.5 mV
Supplier Device Package SC-70-5
Current - Output / Channel 23 mA
Voltage - Supply Span (Max) 6 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

To evaluate this part, use a SC-70-5 to DIP adapter breadboard for prototyping or look for Microchip's generic op-amp evaluation boards. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin to minimize power supply noise.

Part of Microchip MCP6xxx Op-Amps family » MCP6001T

MCP6001T Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
MCP6001T-I/LT (this part) TSSOP-5 -40degC ~ 85degC 49,882
MCP6001T-E/OT SC-74A, SOT-753 -40degC ~ 125degC 38,101
MCP6001T-I/OT SC-74A, SOT-753 -40degC ~ 85degC 164,903

Also Consider

MCP601T-I/OT MCHPMicrochip Technology - Offers a higher 2.8 MHz bandwidth and lower offset voltage if the application requires more precision.