EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    Microchip MCP6xxx Op-Amps Family    MCP6001T    MCP6001T-I/OT
MCP6001T-I/OT

MCHPMCP6001T-I/OT

Microchip Technology
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SOT-23-5
Active164,903 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6001T-I/OT is a general-purpose operational amplifier designed for low-power, single-supply operation from 1.8V to 6V. It features a 1 MHz Gain Bandwidth Product (GBWP) and rail-to-rail input/output capability, making it well-suited for battery-powered applications. With a typical quiescent current of only 100uA, it balances performance and power efficiency in a compact SOT-23-5 package.

Why Choose This Part

The primary advantage is the combination of rail-to-rail performance and low power consumption at a cost-effective price point. Its high phase margin of 90 degrees ensures stability when driving capacitive loads, while the low input bias current allows for high-precision interfacing with high-impedance sources.

Applications

Battery-Powered Instrumentation
Utilizes the low 100uA supply current and 1.8V minimum operating voltage to extend battery life in portable sensing equipment.
Photodiode Pre-amplifiers
The extremely low 1 pA input bias current minimizes offset errors in high-impedance sensor interfaces.
Signal Conditioning
Functions as a buffer or active filter in consumer electronics where rail-to-rail output swing is required to maximize dynamic range.
Analog-to-Digital Converter Buffers
Provides a low-impedance drive for ADC inputs in microcontroller-based systems.

Key Specifications

Slew Rate 0.6V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case SC-74A, SOT-753
Current - Supply 100uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 4.5 mV
Supplier Device Package SOT-23-5
Current - Output / Channel 23 mA
Voltage - Supply Span (Max) 6 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

To evaluate this part, use a SOT-23 breakout board for breadboard prototyping or integrate it directly into your PCB design using standard 0.1uF decoupling capacitors. Ensure the supply voltage stays within the 1.8V to 6V range and keep trace lengths short to minimize noise pickup in high-impedance nodes.

Part of Microchip MCP6xxx Op-Amps family » MCP6001T

MCP6001T Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
MCP6001T-I/OT (this part) SC-74A, SOT-753 -40degC ~ 85degC 164,903
MCP6001T-E/OT SC-74A, SOT-753 -40degC ~ 125degC 38,101
MCP6001T-I/LT TSSOP-5 -40degC ~ 85degC 49,882

Also Consider

MCP601T-I/OT MCHPMicrochip Technology - Provides a higher 2.8 MHz bandwidth and better precision if the 1 MHz limit of the MCP6001 is insufficient.

Categories

Analog ICs > Op-Amps