EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    Microchip MCP6xxx Op-Amps Family    MCP6002T    MCP6002T-I/MS
MCP6002T-I/MS

MCHPMCP6002T-I/MS

Microchip Technology
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-MSOP
Active56,328 in stock
Datasheet Digi-Key Compare Prices

Overview

The MCP6002T-I/MS is a dual general-purpose operational amplifier designed for low-power, battery-operated applications. It features a 1 MHz Gain Bandwidth Product (GBWP) and rail-to-rail input and output operation, allowing for maximum signal swing across its 1.8V to 6V supply range. With a low typical quiescent current of 100uA per channel, it is highly efficient for portable analog signal processing.

Why Choose This Part

The primary advantage is the combination of rail-to-rail I/O and a low 1.8V operating threshold, which maximizes dynamic range in single-supply systems. It also features a phase-reversal protection circuit that prevents false outputs when the common-mode input voltage is exceeded. The 8-MSOP package provides a small footprint for high-density PCB designs while maintaining dual-channel capability.

Applications

Photodiode Amplifier
Utilizes the ultra-low 1 pA input bias current to convert low-level photodiode currents into measurable voltages.
Battery-Powered Instrumentation
Ideal for portable equipment where the 1.8V minimum supply voltage and low power consumption extend battery life.
Active Analog Filters
Provides stable performance for low-frequency filtering in sensor signal conditioning chains.
Notebook and PDA Audio
Serves as a cost-effective buffer or pre-amplifier in space-constrained consumer electronics.

Key Specifications

Slew Rate 0.6V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Current - Supply 100uA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC (TA)
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 4.5 mV
Supplier Device Package 8-MSOP
Current - Output / Channel 23 mA
Voltage - Supply Span (Max) 6 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

To evaluate this part, use a standard 8-MSOP to DIP adapter for breadboard prototyping or integrate it into a 5V or 3.3V analog circuit. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin to minimize noise. Since it is a general-purpose op-amp, it can be simulated using standard SPICE models provided by Microchip.

Part of Microchip MCP6xxx Op-Amps family » MCP6002T

MCP6002T Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
MCP6002T-I/MS (this part) TSSOP-8 -40degC ~ 85degC (.. 56,328
MCP6002T-I/SN SOIC-8 -40degC ~ 85degC (.. 105,232
MCP6002T-E/SN SOIC-8 -40degC ~ 125degC .. 25,175

Also Consider

TLV6002IDGKR TITexas Instruments - Offers a similar 1 MHz bandwidth and rail-to-rail I/O with slightly lower power consumption for cost-sensitive designs.

Featured in Projects

AI-Enabled Battery-Powered Prosthetic Arm with Integrated Motor Actuation
Advanced · 12 parts · ~$50-55
Build your own project with the Project Advisor

Categories

Analog ICs > Op-Amps