EmbeddedRelated.com
    Parts    MCP6xxx Op-Amps Family    MCP6004    MCP6004-I/SL
MCP6004-I/SL

MCHPMCP6004-I/SL

Microchip Technology
Operational Amplifiers - Op Amps Quad 1.8V 1MHz
NRND4,265 in stock
Datasheet Mouser Compare Prices

Overview

The MCP6004-I/SL is a quad, general-purpose operational amplifier designed for low-power applications. It features rail-to-rail input and output operation across a supply voltage range of 1.8V to 6.0V, making it suitable for battery-powered systems.

Why Choose This Part

The primary advantage is the combination of a low 1.8V minimum supply voltage and a very low input bias current of 1 pA. It remains stable with capacitive loads up to 500 pF, ensuring robust performance in varied PCB environments.

Applications

Battery-Powered Instrumentation
Utilizes the 100uA per channel quiescent current to extend battery life in portable sensing equipment.
Photodiode Pre-amplifiers
The extremely low 1 pA input bias current minimizes error in high-impedance sensor interfaces.
Active Filters
The 1 MHz Gain Bandwidth Product and 90-degree phase margin provide stable performance in low-frequency filtering applications.
Analog Signal Conditioning
Provides rail-to-rail swing for maximum dynamic range in 1.8V or 3.3V microcontroller-based ADC systems.

Key Specifications

Slew Rate 0.6V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 14-SOIC (0.154", 3.90mm Width)
Current - Supply 100uA (x4 Channels)
Number of Circuits 4
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC (TA)
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 4.5 mV
Supplier Device Package 14-SOIC
Current - Output / Channel 23 mA
Voltage - Supply Span (Max) 6 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

To evaluate this part, use a standard 14-pin SOIC breadboard adapter or the Microchip MCP6004 Evaluation Board. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin (pin 4) to maintain stability and minimize noise.

Part of MCP6xxx Op-Amps family » MCP6004

MCP6004 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
MCP6004-I/SL (this part) SOIC-14 4,265
MCP6004-I/P DIP-14 2,970
MCP6004-I/ST TSSOP-14 3,874

Also Consider

TLV9004IDR TITexas Instruments - Offers a higher 1.1 MHz bandwidth and lower noise at a similar power profile.
LMV324IDR TITexas Instruments - A widely available industry standard quad op-amp for cost-sensitive 2.7V to 5.5V applications.