EmbeddedRelated.com
    Parts    MCP6006UT-E/LT
MCP6006UT-E/LT

MCHPMCP6006UT-E/LT

Microchip Technology
Standard (General Purpose) Amplifier 1 Circuit Rail-to-Rail SC-70-5
Active12,830 in stock
Datasheet Digi-Key Compare Prices

Overview

The MCP6006UT-E/LT is a single general-purpose operational amplifier featuring a 1 MHz Gain Bandwidth Product and rail-to-rail input/output operation. It is designed for low-power applications with a typical quiescent current of only 50uA and a wide operating voltage range from 1.8V to 5.5V. This variant is provided in a compact 5-lead SC-70 package and includes integrated EMI protection to minimize high-frequency interference.

Why Choose This Part

This op-amp offers an excellent balance of power efficiency and speed with its 1.9V/us slew rate and sub-70uA current draw. Integrated EMI filtering reduces sensitivity to electromagnetic noise, while the lack of phase reversal ensures stable performance when the input range is exceeded.

Applications

Battery-Powered Instrumentation
Low quiescent current of 50uA to 70uA extends operating life in portable handheld devices.
Photodiode Pre-amplifiers
Ultra-low input bias current of 1 pA allows for precise current-to-voltage conversion with minimal error.
Active Filters
Unity gain stability and 1 MHz bandwidth support low-frequency signal conditioning and filtering tasks.
Sensor Conditioning
Rail-to-rail I/O and low-voltage operation make it ideal for interfacing sensors with 1.8V or 3.3V ADCs.

Key Specifications

Slew Rate 1.9V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 5-TSSOP, SC-70-5, SOT-353
Current - Supply 50uA
Number of Circuits 1
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC (TA)
Gain Bandwidth Product 1 MHz
Voltage - Input Offset 1.6 mV
Supplier Device Package SC-70-5
Current - Output / Channel 30 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 1.8 V

Getting Started

To evaluate this part, use a SC-70 to DIP breakout board for breadboard prototyping. Ensure bypass capacitors (typically 0.1uF) are placed close to the VDD pin, and refer to the MCP6006 datasheet for layout recommendations regarding the high-impedance CMOS inputs.

MCP6006 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
MCP6006UT-E/LT (this part) TSSOP-5 12,830
MCP6006T-E/OT SC-74A, SOT-753 31,630

Also Consider

MCP6001T-I/LT MCHPMicrochip Technology - A common alternative from the same family with slightly different noise and power profiles for general applications.
MCP6401T-E/OT MCHPMicrochip Technology - Offers significantly lower quiescent current (approx 45uA) for even more power-constrained designs.