EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    Microchip MCP6xxx Op-Amps Family    MCP6022    MCP6022-E/SN
MCP6022-E/SN

MCHPMCP6022-E/SN

Microchip Technology
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC
NRND13,931 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6022-E/SN is a high-performance, dual-channel operational amplifier designed for low-power applications requiring high speed and precision. It features a 10 MHz Gain Bandwidth Product (GBWP) and a 7V/us slew rate, making it suitable for driving analog-to-digital converters and buffering high-speed signals. The device operates from a single supply voltage between 2.5V and 5.5V and provides rail-to-rail input and output performance.

Why Choose This Part

The MCP6022-E/SN offers an excellent balance of speed and power consumption with its 10 MHz bandwidth at only 1 mA of supply current. Its rail-to-rail input and output capability maximizes dynamic range in low-voltage systems. Additionally, the very low input bias current minimizes errors in high-impedance sensor interface circuits.

Applications

Photodiode Amplifier
Utilizes the ultra-low 1 pA input bias current to convert low-level current signals from sensors into measurable voltages.
Driving A/D Converters
The 10 MHz bandwidth and rail-to-rail output make it an ideal buffer for driving the inputs of high-resolution ADCs in mixed-signal systems.
Active Filtering
High slew rate and gain bandwidth allow for the implementation of precise multi-pole active filters in the kilohertz range.
Battery Powered Instrumentation
Low 1 mA supply current per channel enables high-speed signal processing in portable, energy-constrained devices.

Key Specifications

Slew Rate 7V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 8-SOIC (0.154", 3.90mm Width)
Current - Supply 1mA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC (TA)
Gain Bandwidth Product 10 MHz
Voltage - Input Offset 250 uV
Supplier Device Package 8-SOIC
Current - Output / Channel 30 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 2.5 V

Getting Started

To evaluate this part, use a SOIC-8 to DIP adapter for breadboard prototyping or integrate it directly into a PCB with proper decoupling capacitors (0.1uF) near the VDD pin. Ensure the supply voltage does not exceed 5.5V and maintain a clean ground plane to leverage its 8.7 nV/rtHz low-noise performance.

Part of Microchip MCP6xxx Op-Amps family » MCP6022

MCP6022 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Temp Range Voltage - Input Offset Stock
MCP6022-E/SN (this part) -40degC ~ 125degC .. 250 uV 13,931
MCP6022-I/SN -40degC ~ 85degC (.. 500 uV 13,770

Also Consider

MCP6002-E/SN MCHPMicrochip Technology - Lower cost alternative if your application only requires 1 MHz bandwidth and a lower slew rate.
TLV9062IDR TITexas Instruments - Alternative 10 MHz rail-to-rail op-amp with slightly lower supply current for power-sensitive designs.

Categories

Analog ICs > Op-Amps