EmbeddedRelated.com
    Parts    Microchip MCP6xxx Op-Amps Family    MCP6022    MCP6022-I/P
MCP6022-I/P

MCHPMCP6022-I/P

Microchip Technology
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-PDIP
Active5,885 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6022-I/P is a high-performance, dual-channel operational amplifier featuring a 10 MHz Gain Bandwidth Product and a 7V/us slew rate. It operates over a supply voltage range of 2.5V to 5.5V and provides rail-to-rail input and output capabilities. This specific variant comes in an 8-pin PDIP package, making it ideal for through-hole prototyping and educational environments.

Why Choose This Part

The MCP6022-I/P offers a high slew rate of 7V/us, which is significantly faster than standard low-power op-amps, allowing for better pulse response. Its very low input bias current of 1 pA minimizes errors in high-impedance circuits, while the rail-to-rail I/O maximizes signal swing in low-voltage 3.3V or 5V systems.

Applications

Multi-Pole Active Filters
The 10 MHz bandwidth allows for precise active filter designs in the audio and ultrasonic frequency ranges.
Photodiode Transimpedance Amplifiers
With an ultra-low input bias current of 1 pA, this part is excellent for converting small currents from optical sensors into measurable voltages.
DAC Output Buffering
Rail-to-rail output performance ensures the full dynamic range of a digital-to-analog converter is preserved without clipping.
Medical Instrumentation
Low noise floor and high input impedance make it suitable for portable medical monitoring equipment and sensor interfaces.

Key Specifications

Slew Rate 7V/us
Output Type Rail-to-Rail
Mounting Type Through Hole
Amplifier Type Standard (General Purpose)
Package / Case 8-DIP (0.300", 7.62mm)
Current - Supply 1mA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC (TA)
Gain Bandwidth Product 10 MHz
Voltage - Input Offset 500 uV
Supplier Device Package 8-PDIP
Current - Output / Channel 30 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 2.5 V

Getting Started

Since this is a through-hole 8-PDIP component, it can be plugged directly into a standard breadboard for rapid prototyping. Ensure a 0.1uF ceramic bypass capacitor is placed close to the VDD pin (pin 8) to maintain stability during high-frequency operation. For evaluation, this part is compatible with generic op-amp breakout boards or the Microchip SOIC8-to-DIP adapter if migrating to surface mount variants later.

Part of Microchip MCP6xxx Op-Amps family » MCP6022

MCP6022 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Voltage - Input Offset Stock
MCP6022-I/P (this part) DIP-8 -40degC ~ 85degC (.. 500 uV 5,885
MCP6022-E/P DIP-8 -40degC ~ 125degC .. 250 uV 1,359
MCP6022T-E/ST TSSOP-8 -40degC ~ 125degC .. 250 uV 4,227
MCP6022-I/SN SOIC-8 -40degC ~ 85degC (.. 500 uV 13,770
MCP6022-E/SN SOIC-8 -40degC ~ 125degC .. 250 uV 13,931
MCP6022T-I/SN SOIC-8 -40degC ~ 85degC (.. 500 uV 63,832
MCP6022T-I/ST TSSOP-8 -40degC ~ 85degC (.. 500 uV 6,617

Also Consider

MCP6002-I/P MCHPMicrochip Technology - A more cost-effective dual op-amp option if your application only requires 1 MHz bandwidth.
TLV2372IP TITexas Instruments - Offers a wider supply voltage range up to 16V while maintaining rail-to-rail capabilities and a PDIP-8 footprint.
MCP6022-I/SN MCHPMicrochip Technology - The SOIC-8 surface-mount version of the same silicon for production PCB layouts.