EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    Microchip MCP6xxx Op-Amps Family    MCP6022    MCP6022-I/SN
MCP6022-I/SN

MCHPMCP6022-I/SN

Microchip Technology
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC
NRND13,770 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6022-I/SN is a dual-channel, rail-to-rail input and output operational amplifier featuring a 10 MHz gain bandwidth product. It operates on a single supply voltage ranging from 2.5V to 5.5V while maintaining a low typical supply current of 1 mA per channel. With a 7V/us slew rate and extremely low 1 pA input bias current, it is well-suited for high-impedance sensor conditioning.

Why Choose This Part

The MCP6022 offers a strong balance of speed and power, providing a 10 MHz bandwidth with relatively low current consumption. Its rail-to-rail input and output capability ensures maximum signal swing in low-voltage, single-supply systems.

Applications

Multi-Pole Active Filters
Utilizes the 10 MHz bandwidth and rail-to-rail performance for precise signal filtering in the megahertz range.
High-Impedance Sensor Interfacing
The 1 pA input bias current minimizes error when buffering pH sensors, photodiodes, or other high-impedance sources.
DAC Output Buffering
Provides low-noise, rail-to-rail swing to maximize the dynamic range of digital-to-analog converter outputs.
Battery Powered Instrumentation
Operates down to 2.5V, making it compatible with lithium-ion and multi-cell alkaline battery stacks.

Key Specifications

Slew Rate 7V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 8-SOIC (0.154", 3.90mm Width)
Current - Supply 1mA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 85degC (TA)
Gain Bandwidth Product 10 MHz
Voltage - Input Offset 500 uV
Supplier Device Package 8-SOIC
Current - Output / Channel 30 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 2.5 V

Getting Started

When designing with the MCP6022, place a 0.1uF ceramic bypass capacitor as close to the VDD pin as possible to maintain stability. For prototyping, this 8-SOIC package can be used with standard SOIC-to-DIP adapter boards on a breadboard.

Part of Microchip MCP6xxx Op-Amps family » MCP6022

MCP6022 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Temp Range Voltage - Input Offset Stock
MCP6022-I/SN (this part) -40degC ~ 85degC (.. 500 uV 13,770
MCP6022-E/SN -40degC ~ 125degC .. 250 uV 13,931

Also Consider

MCP6002-I/SN MCHPMicrochip Technology - Lower cost alternative for applications that only require 1 MHz bandwidth.
TLV9062IDR TITexas Instruments - Offers a similar 10 MHz bandwidth and rail-to-rail performance in an 8-SOIC package.

Categories

Analog ICs > Op-Amps