EmbeddedRelated.com
    Parts   Analog ICs  Op-Amps    Microchip MCP6xxx Op-Amps Family    MCP6022T    MCP6022T-E/SN
MCP6022T-E/SN

MCHPMCP6022T-E/SN

Microchip Technology
Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC
NRND21,930 in stock
Datasheet Digi-Key Mouser Compare Prices

Overview

The MCP6022T-E/SN is a high-performance dual operational amplifier from Microchip Technology featuring a 10 MHz Gain Bandwidth Product and a slew rate of 7V/us. It operates over a supply voltage range of 2.5V to 5.5V with rail-to-rail input and output capabilities, making it ideal for low-voltage, high-speed signal conditioning. The device is unity-gain stable and maintains low input bias current of 1 pA, which is critical for high-impedance sensor interfaces.

Why Choose This Part

The MCP6022 offers an excellent balance of speed and power, providing a 10 MHz bandwidth while consuming only 1 mA per channel. Its low noise density of 8.7 nV/rtHz and rail-to-rail swing enable precise analog-to-digital converter (ADC) driving in 5V systems.

Applications

Photodiode Transimpedance Amplifiers
Utilizing the ultra-low 1 pA input bias current to convert small currents into measurable voltages without significant offset errors.
Active Filter Design
Providing 10 MHz bandwidth for implementing high-order low-pass or band-pass filters in signal processing chains.
Battery-Powered Instrumentation
Optimized for 2.5V to 5.5V operation where rail-to-rail performance is necessary to maximize dynamic range.
Sensor Signal Conditioning
Interfacing with capacitive or high-impedance sensors in industrial environments across the extended -40C to 125C temperature range.

Key Specifications

Slew Rate 7V/us
Output Type Rail-to-Rail
Mounting Type Surface Mount
Amplifier Type Standard (General Purpose)
Package / Case 8-SOIC (0.154", 3.90mm Width)
Current - Supply 1mA (x2 Channels)
Number of Circuits 2
Current - Input Bias 1 pA
Operating Temperature -40degC ~ 125degC (TA)
Gain Bandwidth Product 10 MHz
Voltage - Input Offset 250 uV
Supplier Device Package 8-SOIC
Current - Output / Channel 30 mA
Voltage - Supply Span (Max) 5.5 V
Voltage - Supply Span (Min) 2.5 V

Getting Started

When designing with this op-amp, ensure a 0.1uF ceramic bypass capacitor is placed as close as possible to the VDD pin to maintain stability. For prototyping, this 8-SOIC component can be used with standard SOIC-to-DIP adapter boards on a breadboard. Developers should utilize Microchip's MPLAB Mindi Analog Simulator to model circuit behavior and stability before PCB fabrication.

Also Consider

TLV2372IDR TITexas Instruments - Offers a wider supply voltage range up to 16V while maintaining rail-to-rail capabilities.

Categories

Analog ICs > Op-Amps