EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
30days 09hrs 34min 09sec
Learn More →
MCP6542T-I/SN

MCHPMCP6542T-I/SN

Microchip Technology
Comparator Standard (General Purpose) CMOS, Push-Pull, Rail-to-Rail, TTL 8-SOIC
Active3,491 in stock

Overview

The MCP6542T-I/SN is a dual, ultra-low-power comparator featuring push-pull outputs and internal hysteresis. It is designed for low-voltage applications, operating from 1.6V to 5.5V while consuming only 0.6 microamps per comparator. The rail-to-rail input and CMOS/TTL-compatible output make it easy to interface with modern microcontrollers in battery-sensitive designs.

Why Choose This Part

The primary advantage is the extremely low power consumption (1uA max) combined with integrated 6.5mV hysteresis to prevent output switching noise. Its rail-to-rail input capability and wide supply range (1.6V to 5.5V) allow it to operate directly from single-cell Li-ion or multi-cell alkaline batteries.

Applications

Battery Monitoring
Ideal for low-battery detection in handheld devices due to its sub-microamp quiescent current.
RC Timer Circuits
Used in long-period oscillators and timers where low bias current (1pA) minimizes timing errors from high-impedance components.
Windowed Comparators
The dual-element configuration in a single SOIC package enables efficient voltage range monitoring in power management systems.
Mobile Handsets
Provides efficient signal threshold detection in space-constrained, power-critical consumer electronics.

Key Specifications

Type Standard (General Purpose)
Hysteresis 6.5mV
Output Type CMOS, Push-Pull, Rail-to-Rail, TTL
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154", 3.90mm Width)
CMRR, PSRR (Typ) 70dB CMRR, 80dB PSRR
Number of Elements 2
Operating Temperature -40degC ~ 85degC
Propagation Delay (Max) 8us
Supplier Device Package 8-SOIC
Current - Quiescent (Max) 1uA
Current - Input Bias (Max) 1pA @ 5.5V
Voltage - Input Offset (Max) 7mV @ 5.5V
Voltage - Supply, Single/Dual (+/-) 1.6V ~ 5.5V

Getting Started

To evaluate this part, place the SOIC-8 package on a standard breakout board for breadboarding. Ensure a 0.1uF bypass capacitor is located near the VDD pin to maintain stability during output transitions, as the push-pull stage can generate small current spikes.

Part of MCP Comparators family » MCP6542

MCP6542 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Temp Range Stock
MCP6542T-I/SN (this part) SOIC-8 -40degC ~ 85degC 3,491
MCP6542-I/P DIP-8 -40degC ~ 85degC 1,100
MCP6542T-I/MS TSSOP-8 -40degC ~ 85degC 32,887
MCP6542-E/SN SOIC-8 -40degC ~ 125degC 4,072
MCP6542T-E/SN SOIC-8 -40degC ~ 125degC 31,646
MCP6542-E/P DIP-8 -40degC ~ 125degC 494
MCP6542-I/MS TSSOP-8 -40degC ~ 85degC 1,000

Also Consider

TLV3492AIDR TITexas Instruments - Offers even lower typical quiescent current (0.8uA) and a slightly higher maximum operating voltage of 5.5V.
MAX9118EXK+T Maxim Integrated - A single comparator option in a tiny SC70 package for designs with extreme space constraints.