EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
22days 14hrs 27min 06sec
Learn More →
MCP6561T-E/OT

MCHPMCP6561T-E/OT

Microchip Technology
Comparator Standard (General Purpose) CMOS, Push-Pull, Rail-to-Rail, TTL SOT-23-5
Active49,169 in stock

Overview

The MCP6561T-E/OT is a low-power, high-speed push-pull comparator designed for single-supply operation between 1.8V and 5.5V. It features a rail-to-rail input range and an internal 5mV hysteresis, which improves noise immunity in environments with slow-moving input signals. With a maximum propagation delay of 80ns, it is suitable for time-critical signal detection in battery-powered systems.

Why Choose This Part

This comparator offers a strong balance of speed and power, providing 80ns propagation delay while drawing very little current. The push-pull output simplifies design by eliminating the need for an external pull-up resistor, and the integrated hysteresis prevents rapid output oscillation from input noise.

Applications

Window Comparators
Used in monitoring circuits to determine if a voltage level remains within a defined upper and lower threshold.
RC Timers
Utilized in pulse-width modulation and delay circuits where fast transition times and low power consumption are required.
Hand-held Electronics
Ideal for mobile devices due to the low typical quiescent current of 100uA and small SOT-23-5 footprint.
Multivibrators
Suitable for generating stable square waves or clock pulses in low-voltage digital systems.

Key Specifications

Type Standard (General Purpose)
Hysteresis 5mV
Output Type CMOS, Push-Pull, Rail-to-Rail, TTL
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
CMRR, PSRR (Typ) 66dB CMRR, 70dB PSRR
Number of Elements 1
Operating Temperature -40degC ~ 125degC
Current - Output (Typ) 50mA
Propagation Delay (Max) 80ns
Supplier Device Package SOT-23-5
Current - Quiescent (Max) 130uA
Current - Input Bias (Max) 1pA @ 5.5V
Voltage - Input Offset (Max) 10mV @ 5.5V
Voltage - Supply, Single/Dual (+/-) 1.8V ~ 5.5V

Getting Started

For rapid prototyping, mount the SOT-23-5 package on a standard breakout board for use with a breadboard. Ensure a 0.1uF ceramic bypass capacitor is placed as close as possible to the VDD pin to maintain stability during high-speed switching.

Part of Microchip Comparators family » MCP6561

MCP6561 Family

Comparing specs that differ across variants. The current part is highlighted.

Part Number Package Stock
MCP6561T-E/OT (this part) SC-74A, SOT-753 49,169
MCP6561T-E/LT TSSOP-5 67,077

Also Consider

TLV3201 TITexas Instruments - Offers significantly faster performance with a 40ns propagation delay for more timing-sensitive applications.
MCP6541 MCHPMicrochip Technology - A lower-power alternative if the 80ns speed is not required, featuring extremely low quiescent current.