EmbeddedRelated.com
Jacob Beningo
Live online course · Jacob Beningo
AI for Embedded Developers
$100 off for EmbeddedRelated readers until Dec 6 · 5 live sessions, Dec 7-11
Discount ends in
27days 04hrs 46min 34sec
Learn More →
MCP9601T-E/MX

MCHPMCP9601T-E/MX

Microchip Technology
Thermocouple to Digital Converter IC Thermocouple Input I2C Output 20-MQFN (5x5)
Active5,219 in stock

Overview

The MCP9601T-E/MX is a highly integrated thermocouple-to-digital converter that simplifies high-temperature sensing by combining cold-junction compensation and a digitizer into a single MQFN package. It supports eight thermocouple types (K, J, T, N, S, E, B, and R) and outputs temperature data directly via an I2C interface. This IC significantly reduces design complexity by handling the delicate analog-to-digital conversion and error correction required for thermocouple probes.

Why Choose This Part

The device features integrated open-circuit and short-circuit detection to improve system safety and fault diagnostics. With a typical supply current of 300 uA and a 2 uA shutdown mode, it is ideal for power-constrained applications, while the four programmable alert outputs allow for autonomous temperature monitoring without constant MCU polling.

Applications

Industrial Oven Control
Precise monitoring and regulation of high-temperature furnace environments using robust thermocouple probes.
Petrochemical Thermal Management
Monitoring heat exchangers and processing units where wide temperature ranges and high reliability are required.
Hand-held Measurement Equipment
Compact, battery-powered digital thermometers that require low power consumption and integrated compensation.
Engine Exhaust Monitoring
Sensing extreme temperatures in automotive or aerospace exhaust manifolds to optimize combustion and safety.

Key Specifications

Type Thermocouple to Digital Converter
Input Type Thermocouple
Output Type I2C
Mounting Type Surface Mount
Package / Case 20-VQFN Exposed Pad
Current - Supply 300 uA
Operating Temperature -40degC ~ 125degC (TA)
Supplier Device Package 20-MQFN (5x5)

Getting Started

To evaluate this sensor, the MCP9601 Evaluation Board (ADM00665) can be used to interface with a PC. For custom hardware, ensure the 20-MQFN exposed pad is properly soldered for thermal stability and connect the I2C lines with appropriate pull-up resistors to a controller operating between 2.7V and 5.5V.

Also Consider

MAX31855K Analog Devices - A popular SPI-based alternative specifically for K-type thermocouples with integrated cold-junction compensation.
MAX31856 Analog Devices - Offers similar multi-type thermocouple support with a 19-bit ADC and SPI interface for high-resolution requirements.